🚀 go-pugleaf

I want to connect a serial plotter using XON/XOFF protocol to our server 
running Netware3.11 and PSERVER.NLM version 3.7.6. It 
all works quite fine until the connection between server and plotter is 
interrupted for some reason, e.g. a plotter failure or cabling problem. If the 
printserver is waiting for XON signal at that moment, it is nearly 
impossible to force the server to proceed. Even if I kill the faulty printjob, 
the server is still waiting for XON before serving the next job.
The only possibility I found is to unload the printserver (not a 
practicable way) or to connect a terminal instead of the 
plotter and transmit XON by pressing ^Q (also not a very good solution).

If anyone out there has a better idea( e.g. a better PSERVER.NLM), I would be 
very happy to hear about it!

 Thanks in advance!



===========================================================================
         ,    ,
        / \--/I      Dipl.-Ing. Thomas Muekusch
       / 0   0 \
      (=-  x  .=)    Institut fuer Uebertragungstechnik und Elektroakustik
       ~\ `~~ /~     Technische Hochschule Darmstadt
         HHHHH       Merckstrasse 25
        /^^^^^\      64283 Darmstadt
  #### II <M>  I
 ##  ##II     II     Internet   : mk@uet1.es.e-technik.th-darmstadt.de
 #    ###    ###     
     ### WWWW ###    Phone      : 0(049) 6151 / 16-3469
                     FAX        : 0(049) 6151 / 16-5545
===========================================================================