4.1 Server Load Problem

Thread View: comp.sys.novell

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Scott Fringer Fri, 04 Aug 1995 00:00

#6064

Author: Scott Fringer
Date: Fri, 04 Aug 1995 00:00

29 lines
1623 bytes

Howdy,
	We're running a 4.1 server here, and this morning it did something
extremely odd.  When the server comes up it stops and asks for the
Server Name and Internal IPX Address.  It then proceeds to process the
AUTOEXEC.NCF.  After perusing a CONLOG dump, it shows that in the
AUTOEXEC it is attempting to reassign the Server Name and Internal IPX
Address.  My question, what could be causing this?  I've run vrepair,
and it showed no errors encountered.

	There's also an NLM that wouldn't load.  The NLM is AXS from Extended
Systems.  It comes up and says that a copy is already running on the
network and I need to purchase another copy or that there was a
problem reading from the bindery.  The strangest thing, after running
VREPAIR, this NLM loads fine now.  Being as it's work hours here, I
didn't wanna test downing the server and seeing if the AUTOEXEC would
process properly.

	So my quick question...

	Does anyone know what would stop the server from processing its
AUTOEXEC.NCF?

Thanks in advance,


Scott Fringer
Network Administrator
Barr Systems, Inc.
Gainesville FL

Re: 4.1 Server Load Problem

#6063

Author: Dan Sobel
Date: Sun, 06 Aug 1995 00:00

17 lines
1400 bytes

In article <3vtil1$hlv@ixnews6.ix.netcom.com>, ScottF@BarrSys.com says...
>
>Howdy,
>        We're running a 4.1 server here, and this morning it did something
>extremely odd.  When the server comes up it stops and asks for the
>Server Name and Internal IPX Address.  It then proceeds to process the
>AUTOEXEC.NCF.  After perusing a CONLOG dump, it shows that in the
>AUTOEXEC it is attempting to reassign the Server Name and Internal IPX
>Address.  My question, what could be causing this?  I've run vrepair,
>and it showed no errors encountered.

	Load INSTALL or LOAD EDIT AUTOEXEC.NCF and ENSURE that the
first two lines contain SERVER NAME and Internal Network Number.

-- 
---------------------------------------------------------------------
Dan Sobel                 Amateur N6HLZ                 snake@wco.com

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads