Article View: comp.sys.nsc.32k
Article #1536Re: Clock on ICM-3216
From: John C Schultz
Date: Thu, 12 Jan 1989 02:37
Date: Thu, 12 Jan 1989 02:37
21 lines
1288 bytes
1288 bytes
In article <493@hocpa.UUCP> rusty@hocpa.ATT.COM (91341-M.W.HADDOCK) writes:
>Happy New Year folks!
>
>Unfortunately, since the beginning of the new year, fe2o3 (my ICM3216) keeps
>reporting each minute (or there abouts) that the rtclock is off by 86400
>seconds +/- 1. This comes to be 1-day worth of seconds. Naturally, I'm
Nope, I have not had this problem. However I am (still) using the
V.2.2 National port.
I don't think the battery is the problem since my board is a couple
years old (Rev A PROMS) too.
Of course bad batteries and/or a bug in the software is not unheard of
:-).
--
john c. schultz schultz@3M.Com ..!uiucuxc!mmm!schultz (612) 733-4047
3M Center, Bldg 518-1-1, St. Paul, MN 55144-1000
The opinions expressed herein are, as always, my own and not 3M's.
Technical Details
Message-ID:
<1209@mmm.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!ames!xanth!nic.MR.NET!umn-cs!mmm!schultzReferences:
<493@hocpa.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!ames!xanth!nic.MR.NET!umn-cs!mmm!schultz From: schultz@mmm.UUCP (John C Schultz) Newsgroups: comp.sys.nsc.32k Subject: Re: Clock on ICM-3216 Summary: no problem here but using National V.2.2 port Keywords: ICM3216 clock chip BSD Message-ID: <1209@mmm.UUCP> Date: 12 Jan 89 02:37:52 GMT References: <493@hocpa.UUCP> Reply-To: schultz@mmm.UUCP (John C Schultz) Organization: 3M Company - ES&T; St. Paul, MN Lines: 21