Article View: comp.sys.nsc.32k
Article #165Re: Drive Enclosure..
From: Charles D'Englere
Date: Wed, 09 May 1990 17:53
Date: Wed, 09 May 1990 17:53
36 lines
1639 bytes
1639 bytes
news@daver.bungi.com writes:
>I thought I would share with the group how I packaged the 9380S drives
>which I purchased in the group buy a while back.
[*** rest deleted ***]
>One modification I am thinking about is adding the ability to select
>SCSI ID's from a switch on the rear surface. This reminds me,
>does anyone know of a simple way in which the SCSI terminator
>resistors could be 'inserted/removed' via a rear surface
>switch ??
>Best regards,
>johnc
>--
One way is to use the same terminators that Apple uses on its SCSI drives.
It fits on the end of the last SCSI device.
---------- ------------ ------------ ----------- ------
| UNIX Box |-----| SCSI DRIVE |-----| SCSI DRIVE |-----| SCSI TAPE |--| TERM |
---------- ------------ ------------ ----------- ------
I have made a little switch unit, that can be adaptive to any SCSI drive to
allow changing the address just buy pushing a button. This makes setting the
SCSI address very easy.
Good luck,
Charles
--
C. D'Englere Consulting UUCP: {...!gatech,!emory}!kd4nc!cld
Charles L. D'Englere Phone: 404+3259074
1409 Bronze Leaf Ct. Stone Mountain, GA 30083
Technical Details
Message-ID:
<4463@kd4nc.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!samsung!emory!kd4nc!cldReferences:
<9005082009.AA00239@manatee.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!samsung!emory!kd4nc!cld From: cld@kd4nc.UUCP (Charles D'Englere) Newsgroups: comp.sys.nsc.32k Subject: Re: Drive Enclosure.. Message-ID: <4463@kd4nc.UUCP> Date: 9 May 90 17:53:07 GMT References: <9005082009.AA00239@manatee.UUCP> Organization: KD4NC HAM Packet Radio Gateway Lines: 36