Article View: comp.sys.nsc.32k
Article #218Re: Hardware Problems
From: Des Young
Date: Wed, 13 Jun 1990 01:03
Date: Wed, 13 Jun 1990 01:03
9 lines
766 bytes
766 bytes
Hmm, this is beginning to look like shorted pins/wires. May pay to check adjacent wires are not shorted, say adjacent pins on the PAL. A solder bridge between two traces can do it. Give the PCB a good scrub with a stiff brush on the back. Des. trademarks abound, usual disclaimers apply, opinions are mine des@pei.com Des Young (415) 335-1888 Protocol Engines Inc., Mountain View, CA
Technical Details
Message-ID:
<9006130103.AA21244@musashi.wpd.sgi.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!usc!apple!mips!daver!bungi.com!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!usc!apple!mips!daver!bungi.com!news From: des@musashi.wpd.sgi.com (Des Young) Newsgroups: comp.sys.nsc.32k Subject: Re: Hardware Problems Message-ID: <9006130103.AA21244@musashi.wpd.sgi.com> Date: 13 Jun 90 01:03:51 GMT Sender: news@daver.bungi.com Lines: 9 Approved: news@daver.bungi.com