Connect 'C201 TCU to '332 CPU and '382 MMU

Article View: comp.sys.nsc.32k

Article #83

#83

From: Moellers
Date: Tue, 14 Nov 1989 07:44

19 lines
1123 bytes

Hi,

I am trying to build a single board computer based on the '332 and '382
chips.
I've got the chips ('C201 TCU, '332 CPU, '382 MMU) but...
In NSC's "Microprocessor Databook" they show an "Interface suggestion"
where they use "Bus Control Logic" to generate the RD, WR, TS0, DBE, RDY
signals from the CPU and MMU signals rather than using the logic built
into the 'C201.

1. Why is this?
2. What does this "Bus Control Logic" look like?
   Can I get away with just a PAL or is it a project on it's own?


Josef Moellers					| Nixdorf Computer AG
 USA:  uunet!philabs!linus!nixbur!mollers.pad	| Dept. DX-PC
!USA: mcvax!unido!nixpbe!mollers.pad		| Pontanusstrasse
Phone: (+49) 5251 146245			| D-4790 Paderborn

Technical Details

Message-ID: <620@nixpbe.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!mnetor!tmsoft!torsqnt!jarvis.csri.toronto.edu!rutgers!ucsd!usc!snorkelwacker!spdcc!merk!alliant!linus!nixbur!nixpbe!peun11!josef

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!mnetor!tmsoft!torsqnt!jarvis.csri.toronto.edu!rutgers!ucsd!usc!snorkelwacker!spdcc!merk!alliant!linus!nixbur!nixpbe!peun11!josef
From: josef@peun11.uucp (Moellers)
Newsgroups: comp.sys.nsc.32k
Subject: Connect 'C201 TCU to '332 CPU and '382 MMU
Message-ID: <620@nixpbe.UUCP>
Date: 14 Nov 89 07:44:11 GMT
Sender: bnews@nixpbe.UUCP
Distribution: comp.sys.nsc.32k
Lines: 19