🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.nsc.32k
Article #943

SCSI floppy message..

#943
From: news
Date: Fri, 17 May 1991 01:54
69 lines
2764 bytes
I thought the attached message from 'comp.periphs.scsi' might be
of interest given the recent discussion of Teac SCSI floppy 
drives.  I found of particular interest the note at the end of the 
article mentioning the Sun Common SCSI Architecture mailing list 
and the availability of a Teac device driver.

Best regards,
johnc

  --------------------- attached message ----------------------

From: Harvey_Taylor@mindlink.bc.ca (Harvey Taylor)
Newsgroups: comp.periphs.scsi
Subject: Teac 235-JS info needed
Message-ID: <5821@mindlink.bc.ca>
Date: 11 May 91 16:24:15 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 42
To: johnc
Status: RO


    Well at long & dear last, my Teac Scsi Floppy arrived.

    It seems that I have a different version of the TEAC FDH-235JS SCSI
 floppy than the hardware spec (both JS & HS) . What I want to do is
 put it in auto density sense as mentioned in the SCSA driver Readme
 (see below).
    The problem is that there is a new row of shorting blocks which are
 undocumented. These are at the back beside the power connector & are
 labelled from front to back:

            AC AE IR RY D2 D1 D0

                            : The factory config was AE & D0 shorted.

    So, does anybody know the blocks to set for auto density sense mode
 on the 235JS?
    Does anybody know what all the blocks configure? There are the User
 settable blocks, as well:

        EJC J H G F LEV HDS STL

                          : PAR, MON are the only two documented in the
 hardware specification.
    And finally, has anybody got a copy of the "FC-1-01 Software
 Specification" out of Teac?
    -het

    PS.
    Jonathan Hue maintains the SCSA mailing list. Here is a clip:
|Re:The Sun Common SCSI Architecture mailing list. Send your subscription
|request to scsa-request@island.com, submissions to scsa@island.com.  There
|are people there who can answer your questions. There's even a complete
|SCSA driver in the archives to control a TEAC SCSI floppy.


  "DOS ... is still a real mode only non-reentrant
  interrupt handler, and always will be." - Russell William

 Harvey Taylor      Meta Media Productions
 uunet!van-bc!rsoft!mindlink!Harvey_Taylor
            a186@mindlink.bc.ca


-- 
John Connin: manatee Orlando, Florida
         UUCP: {uunet,ge-dab,ucf-cs}!tarpit!tous!manatee!johnc
Technical Details
Message-ID: <9105162154.AA00422@manatee.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!ogicse!decwrl!sgi!mips!daver!bungi.com!news

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rpi!dali.cs.montana.edu!ogicse!decwrl!sgi!mips!daver!bungi.com!news
From: news@bungi.com.ogi.edu
Newsgroups: comp.sys.nsc.32k
Subject: SCSI floppy message..
Message-ID: <9105162154.AA00422@manatee.UUCP>
Date: 17 May 91 01:54:20 GMT
Sender: news@daver.bungi.com
Lines: 69
Approved: news@daver.bungi.com