🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.powerpc
5 messages
5 total messages Started by Chad Irby Tue, 15 Aug 1995 15:38
Re: Debate: PowerMac "trounces" Pentium....???
#1071
Author: Chad Irby
Date: Tue, 15 Aug 1995 15:38
17 lines
1230 bytes
Lars Hohmuth (hohmuth@cipserv1.physik.uni-ulm.de) wrote:

: Even in Germany, where Hardware prices tend to be higher ( and
: that's putting it mildly:-) ) a Pentium 60 PCI with a OEM 15"
: and your config would cost only about 1800.- including taxes 
: ( which are 15% BTW )

: BTW: Seems to be about the same as a stock 5200

Well, it's about the same as a stock 5200, except for being quite a bit 
slower... got the price on a 75 MHz P5?  That's a better comparison (even 
though the PC would still be a bit slower).

-- 

Chad Irby           /    My greatest fear: that future generations will,
cirby@gate.net     /      for some reason, refer to me as an "optimist."
Re: Debate: PowerMac "trounces" Pentium....???
#1110
Author: Lawson English
Date: Wed, 16 Aug 1995 01:22
26 lines
1744 bytes
Chad Irby (cirby@news.gate.net) wrote:
: Lars Hohmuth (hohmuth@cipserv1.physik.uni-ulm.de) wrote:

: : Even in Germany, where Hardware prices tend to be higher ( and
: : that's putting it mildly:-) ) a Pentium 60 PCI with a OEM 15"
: : and your config would cost only about 1800.- including taxes 
: : ( which are 15% BTW )

: : BTW: Seems to be about the same as a stock 5200

: Well, it's about the same as a stock 5200, except for being quite a bit 
: slower... got the price on a 75 MHz P5?  That's a better comparison (even 
: though the PC would still be a bit slower).

I wonder about this comparison. ANyone actually run the BYTE benchmarks 
(or any other "cross-platform" bechmarks) on a 5200 or any of other newly 
released PowerMacs?

Until then, I suspect that you may well be blowing lots of hot air...

--
-------------------------------------------------------------------------------
Lawson English                            __  __     ____  ___       ___ ____
english@primenet.com                     /__)/__) / / / / /_  /\  / /_    /
                                        /   / \  / / / / /__ /  \/ /___  /
-------------------------------------------------------------------------------
Re: Debate: PowerMac "trounces" Pentium....???
#1119
Author: Joe Ragosta
Date: Wed, 16 Aug 1995 11:38
39 lines
2241 bytes
In article <40rh90$1r8@nnrp3.primenet.com>, english@primenet.com (Lawson
English) wrote:

> Chad Irby (cirby@news.gate.net) wrote:
> : Lars Hohmuth (hohmuth@cipserv1.physik.uni-ulm.de) wrote:
> 
> : : Even in Germany, where Hardware prices tend to be higher ( and
> : : that's putting it mildly:-) ) a Pentium 60 PCI with a OEM 15"
> : : and your config would cost only about 1800.- including taxes 
> : : ( which are 15% BTW )
> 
> : : BTW: Seems to be about the same as a stock 5200
> 
> : Well, it's about the same as a stock 5200, except for being quite a bit 
> : slower... got the price on a 75 MHz P5?  That's a better comparison (even 
> : though the PC would still be a bit slower).
> 
> I wonder about this comparison. ANyone actually run the BYTE benchmarks 
> (or any other "cross-platform" bechmarks) on a 5200 or any of other newly 
> released PowerMacs?
> 
> Until then, I suspect that you may well be blowing lots of hot air...
> 

The 5200 benchmarks about the same as the original 6100/60. Several
comparisons show the PowerMac 6100 to be roughly equal to a 75 MHz
Pentium.

If you don't like that comparison, use the 7200/75 (75 MHz 601) at $1700
sans monitor. That will handily beat a 75 MHz Pentium (independent
studies)

-- 
Regards, Joe Ragosta -- 100% Chemical and proud of it.
Microsoft Network is prohibited from redistributing this work in any form,
in whole or in part. Copyright, Joseph Ragosta, 1995. License to distribute
this post is available to Microsoft for $1000. Posting without permission
constitutes an agreement to these terms. Please send notices of violation
to docjoe@interramp.com and Postmaster@microsoft.com
Re: Debate: PowerMac "trounces" Pentium....???
#1135
Author: Robert Cassidy
Date: Wed, 16 Aug 1995 16:02
21 lines
1238 bytes
In article <40rh90$1r8@nnrp3.primenet.com>, english@primenet.com (Lawson
English) wrote:

> Chad Irby (cirby@news.gate.net) wrote:

> : Well, it's about the same as a stock 5200, except for being quite a bit 
> : slower... got the price on a 75 MHz P5?  That's a better comparison (even 
> : though the PC would still be a bit slower).
> 
> I wonder about this comparison. ANyone actually run the BYTE benchmarks 
> (or any other "cross-platform" bechmarks) on a 5200 or any of other newly 
> released PowerMacs?
> 
> Until then, I suspect that you may well be blowing lots of hot air...

I've got a 5200 at my disposal if anyone wants to send me executables, I'd
be glad to run them.

-- 
Bob Cassidy
UC Irvine
Re: Debate: PowerMac "trounces" Pentium....???
#1170
Author: Lawson English
Date: Thu, 17 Aug 1995 04:44
16 lines
1406 bytes
Robert Cassidy (rmcassid@uci.edu) wrote:
[snipt]
: I've got a 5200 at my disposal if anyone wants to send me executables, I'd
: be glad to run them.

Rob Barris might be interested. If he doesn't see this on c.s.ppc, check 
out comp.benchmark. He's usually got a message or two there...



--
-------------------------------------------------------------------------------
Lawson English                            __  __     ____  ___       ___ ____
english@primenet.com                     /__)/__) / / / / /_  /\  / /_    /
                                        /   / \  / / / / /__ /  \/ /___  /
-------------------------------------------------------------------------------
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads