🚀 go-pugleaf

Hi,

pete@wvus.org (Pete Gregory) writes:

>we use /etc/dump - the filesystem dump program here.  two years ago i
>wrote a shell-script wrapper for it so the operators could just answer
>questions.  that works fine, if i tell dump to write directly to output 
>device.  if i tell dump to write to stdout (an allowable feature 
>according to the man page), it writes several error messages to the 
>screen at the end of the dump that say "DUMP: Failure to acquire 
>semaphore", "DUMP: Failure to release semaphore" and "DUMP: Possibly 
>corrupted archive" (i'm not sure about the exact text of the last one).

1. Yes the problem has arrisen for myself, and with the help of sequent I
was able to fix the problem straight away... Is the Tape drive you are
using an Exabyte or standard .25 cartridge?
My problem centred around an exebyte drive on a S27.
We had to make sure the tape drive was getting all the right parameters
before it would work correctly...

/etc/dump 0sbdfu 15070 8 500000 /dev/rmt/<tape> /dev/dsk/<disk>

This is running under PTX 1.3.0 and it works fine dumping to an exabyte
drive.

Hope this helps..

bye

--
Brett Sivies			e-mail: brett@win4.vut.edu.au (IRC: Supreme)
Systems Programmer		Phone:  61 03 365 2112
Victoria University of Tech.	Fax:    61 03 366 8285
St. Albans			Post:   P.O Box 11428, Melbourne Mail Centre,