Need help with rtel

Thread View: comp.sys.sequent

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Glenn A. Jensen Thu, 05 Nov 1992 22:38

#406

Author: Glenn A. Jensen
Date: Thu, 05 Nov 1992 22:38

27 lines
1858 bytes

--------------------------------------------------------------------
I am making this posting for a friend who doesn't have access yet
to the Internet.  So, those who can help him out need to call his
800-number listed below.  Please *don't* post replies to Usenet or
e-mail replies to me.
--------------------------------------------------------------------

HELP!!!!

We have a small network of SEQUENT hosts.  They are networked via
MICOM Marathon 5K's.  Micom provides optional software known as rtel
(reverse telnet) software.  This software provides the ability to
install a printer on the network via a REMOTE TERMINAL SERVER (RTS)
module which plugs into the 5k.  My problem is that MICOM, at this
time does not support the SEQUENT hosts, which are running DYNIX/
ptx 1.4.

If you are familiar with the rtel software, you are aware that we
have the source code available to us.  After modification to the
makefile and some souce code modifications I have been able to
compile executables for the SEQUENT hosts however, they don't work. 
If anyone out there has any words of wisdom, or has already solved
this problem and would be willing to spend a few minutes to help us
out please call BRIAN JONES with WOODWORKER'S SUPPLY in Albuquerque,
NM at 1-800-231-2748.  Thanks alot.

Brian.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads