🚀 go-pugleaf

In <1993Jan11.195638.10797@Princeton.EDU> clk@ernie.Princeton.EDU (Christopher Kranz) writes:
| I am in the process of converting our disk-poor Iris 4D/25s and 4D/35s to
| diskless machines.  I am planning to use the local disk for paging and
| scratch space.  I have run into a couple of problems in the process of
| installing the diskless share trees and diskless client tress.
| 
| The exit commands from installing the share tree for the 4D/35s produced the
| following errors:
| 
| idev: dependent driver shmiq is EXCLUDED
| idev: dependent driver shmiq is EXCLUDED

It looks to me like perhaps you used the wrong clinst.dat, and didn't
get a number of files.

| Does anyone know if this indeed a problem or just a side effect of building a
| generic kernel for a given diskless class?

It *is* a problem.  You won't have a kernel to boot!

| Assuming the above was not a problem, I went ahead and attempted to install a
| client tree.  During the installation I got the following error messages:
| 
| Installing new versions of selected eoe2.sw subsystems
| sh: /usr/diskless/client/4D35/client1/bin/rm: not found

Sounds like some other part of the install (from eoe1.sw.unix) failed
also, or it was using a share tree that was subsequently trashed.

| [Aux Cmd] cd $rbase/usr/lib/fmfonts ; $rbase/bin/rm -f ChBlIc08.pcf.Z
|           ChBlIc11.pcf.Z ChBlIc12.pcf.Z ChBlIc14.pcf.Z ChBlIc15.pcf.Z
|           ChBlIc17.pcf.Z ChBlIc25.pcf.Z ChBlIc33.pcf.Z ChrBlk08.pcf.Z
|           ChrBlk11.pcf.Z ChrBlk12.pcf.Z ChrBlk14.pcf.Z ChrBlk15.pcf.Z
|           ChrBlk17.pcf.Z ChrBlk25.pcf.Z ChrBlk33.pcf.Z ChrtrI08.pcf.Z
|           ChrtrI11.pcf.Z ChrtrI12.pcf.Z ChrtrI14.pcf.Z ChrtrI15.pcf.Z
|           ChrtrI17.pcf.Z ChrtrI25.pcf.Z ChrtrI33.pcf.Z ChrtrR08.pcf.Z
|           ChrtrR11.pcf.Z ChrtrR12.pcf.Z ChrtrR14.pcf.Z ChrtrR15.pcf.Z
|           ChrtrR17.pcf.Z ChrtrR25.pcf.Z ChrtrR33.pcf.Z ChBlIc.ff ChrBlk.ff
|           ChrtrI.ff ChrtrR.ff

This part is just informational.

| I checked for myself and the file /usr/diskless/client/4D35/client1/bin/rm
| did not exist.  I tried to figure out why.  After poking around a little I
| discovered there are two eoe1.sw.cpp and eoe1.sw.lboot subsystems.  One set
| is from the IRIX 4.0.5 CD and is referred to as "eoe1 4.0.5 A" on the CD ROM
| label.  The other set is on the IDO 4.1 CD and is referred to as "eoe1 4.0.5"
| on the CD ROM label.  The eoe1.idb from the IRIX 4.0.5 CD that contains the
| commands to install rm, as well as other files, got clobbered when the second
| eoe1 subsystem from the IDO 4.1 disk was installed during the share tree
| installation.  

They should have gotten *replaced*, but not "clobbered", unless you used
different sets of options during the installation.

| Now for the questions.  Was it a mistake to install both of them?  How do I

No.

| keep $DISKLESS/$SHARE/usr/lib/inst/eoe1.idb from getting over written by the
| one on the IDO disk?  Which version of eoe1.sw.cpp and eoe1.sw.lboot do I

You shouldn't; it is supposed to do so.

| need to have installed, the ones from the IRIX 4.0.5 A CD or the one from IDO
| 4.1 CD?  Can I safely merge the two eoe1.idb files by hand?

In this case, they should be identical, so it shouldn't matter.

| BTW, for some reason clinst needs to be able to create a symbolic link in /
| called share that points to $DISKLESS/$SHARE/$CLASS.  I had a directory in /
| called share and could not get things to work until I renamed it to something
| else.  I wish there had been some error message telling me that, I just
| happened to stumble upon it.

I'll file a bug on that.  The share tree is used to reduce disk space
used on the server if you have multiple clients of the same system type.
The documentation on setting up diskless should mention this already;
if it doesn't follow up to this, and I'll file a bug on that also.
--
Let no one tell me that silence gives consent,  |   Dave Olson
because whoever is silent dissents.             |   Silicon Graphics, Inc.
    Maria Isabel Barreno                        |   olson@sgi.com