🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sgi.admin
Article #150

Re: How to boot from 2nd disk with 1st installed as well?

#150
From: Jonathan D. Trudel[ftd]
Date: Tue, 12 Jan 1993 16:05
7 lines
969 bytes
In article <1993Jan11.144142.19697@cs.ruu.nl>, edwin@cs.ruu.nl (Edwin Kremer) writes:
|> Well, it boots, but still seems to want to use the 1st  SCSI  disk  (the
|> original system disk in the lowest slot) for root and /usr filesystem.
|> 
|> What other options do I need to `normally' boot from the 2nd disk? 

Did you modify /etc/fstab properly, or does it refer to the original disk?
Technical Details
Message-ID: <1993Jan12.160523.1831@ulysses.att.com>
Path: arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!mcdchg!laidbak!tellab5!cuuxb!nsscmail!ulysses!ulysses.att.com!jdt
References: <1993Jan11.144142.19697@cs.ruu.nl>

Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.sgi.admin
Path: arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!mcdchg!laidbak!tellab5!cuuxb!nsscmail!ulysses!ulysses.att.com!jdt
From: jdt@ulysses.att.com (Jonathan D. Trudel[ftd])
Subject: Re: How to boot from 2nd disk with 1st installed as well?
Message-ID: <1993Jan12.160523.1831@ulysses.att.com>
Date: Tue, 12 Jan 1993 16:05:23 GMT
Reply-To: jdt@ulysses.att.com
References:  <1993Jan11.144142.19697@cs.ruu.nl>
Organization: AT&T Bell Labs, Murray Hill, NJ
Lines: 7