Re: problem upgrading from R3K to R4K Indigo

Article View: comp.sys.sgi.admin

Article #190

Back to comp.sys.sgi.admin Previous Next

#190

From: Jeff Smith
Date: Tue, 26 Jan 1993 05:10

10 lines
893 bytes

In <1993Jan26.014846.1473@kronos.arc.nasa.gov> doctor@tardis.arc.nasa.gov (Terry Fong) writes:

>I have no problem booting the machine from CD (which I did to upgrade
>to 4.0.5F). Also, if I replace the old R3000 board, the machine boots
>fine as well.

You need to re-install software with the R4000 board installed.  It
should be detailed in the release notes for the upgrade.

jeffs@sgi.com

Technical Details

Message-ID: <vbhp6uo@zola.esd.sgi.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!olivea!sgigate!sgi!twilight!zola!soul!jeffs

References: <1993Jan26.014846.1473@kronos.arc.nasa.gov>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!olivea!sgigate!sgi!twilight!zola!soul!jeffs
From: jeffs@soul.esd.sgi.com (Jeff Smith)
Newsgroups: comp.sys.sgi.admin,comp.sys.sgi.hardware
Subject: Re: problem upgrading from R3K to R4K Indigo
Keywords: indigo, R4000, upgrade
Message-ID: <vbhp6uo@zola.esd.sgi.com>
Date: 26 Jan 93 05:10:36 GMT
References: <1993Jan26.014846.1473@kronos.arc.nasa.gov>
Sender: news@zola.esd.sgi.com (Net News)
Organization: Silicon Graphics, Inc.  Mountain View, CA
Lines: 10

Reply to Parent Message