🚀 go-pugleaf

Michael Gajhede (michael@ki.ki.dk) wrote:
: I would like to add a static route at startup time, doing the same
: as the command  : route add default ...
: Could anyone  please tell me exactly where to put this command ?

Here's what we do:

[dcs neutron:~/ws] cat /etc/init.d/network.local
#! /bin/sh
#Tag 0x00000f00

# This script controls local network setup. The following symlinks must be
made
# on each machine on which this is run:
#
#   ln -s /etc/init.d/network.local /etc/rc0.d/K39network
#   ln -s /etc/init.d/network.local /etc/rc2.d/S31network
#
# (One copy lives in /etc/init.d on each machine.) It is actually run as
# '/etc/rc0.d/K39network stop' and '/etc/rc2.d/S31network start' during
# transitions to run levels 0 and 2 respectively. See the comments in
# /etc/init.d/network.

case "$1" in
'start')

    # There is only one router on our subnet and we need not run 'routed'.
See
    # section 2.3.6 of the Network Administration Guide. We just tell the
    # network software to route all packets through the chem.yale.edu
gateway:

    /usr/etc/route add default 130.132.25.1 1
    ;;
'stop')
    ;;
*)
    echo "Usage: $0 {start|stop}"
    ;;
esac

Hope it helps. Cheers,

--
| Dave Schweisguth   Yale MB&B & Chemistry   Net: dcs@neutron.chem.yale.edu |
| Lab phone: 203-432-5208     Fax: 203-432-6144    Home phone: 203-624-3866 |
| For complying with the NJ Right To Know Act:  Contents partially unknown. |