NTP Time?

Thread View: comp.sys.sgi.admin

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Jonathan Heiliger Sat, 02 Jan 1993 21:12

#78

Author: Jonathan Heiliger
Date: Sat, 02 Jan 1993 21:12

17 lines
1099 bytes

[ Article crossposted from comp.sys.sgi ]
[ Author was Jonathan Heiliger (jonathan@rahul.net) ]
[ Posted on Sat, 2 Jan 1993 21:09:37 GMT ]

    I recently FTPed the NTP time server software and have tried compiling it 
on my SGI running IRIX 4.0.5  However...with no luck.  Has anyone gotten this 
to compile, or can suggest an alternate time package?  Thanks.

-- 
Jonathan Heiliger .... Electric Power Research Institute
Internet: jonathan@mecca.epri.com -/- jonathan@rahul.net
Telephone <*> [415].855.2888

-- 
Jonathan Heiliger .... Electric Power Research Institute
Internet: jonathan@mecca.epri.com -/- jonathan@rahul.net
Telephone <*> [415].855.2888

Re: NTP Time?

#86

Author: Scott Henry
Date: Mon, 04 Jan 1993 23:07

20 lines
1357 bytes

>>>>> In article <C08w97.6BD@rahul.net>, jonathan@rahul.net (Jonathan Heiliger) writes:

jonathan>     I recently FTPed the NTP time server software and have
jonathan> tried compiling it on my SGI running IRIX 4.0.5
jonathan> However...with no luck.  Has anyone gotten this to compile,
jonathan> or can suggest an alternate time package?  Thanks.

I did a port of xntp (the NTP V2 spec) awhile ago. Both binaries &
patches to the source are available for anonymous FTP from
sgigate.sgi.com in the directory ~ftp/net-services/xntp. Usual
disclaimer about unsupported software applies.

Maybe this should be in the FAQ?

It's always reasonable to look around the anonymous FTP directories on
sgi.com and sgigate.sgi.com (which are two different machines on two
different internet connections).

=-=-=-=-=

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads