printing images

Article View: comp.sys.sgi.graphics

Article #155

Back to comp.sys.sgi.graphics Previous Next

#155

From: Steven L. Smith
Date: Thu, 28 Jan 1993 19:17

17 lines
1102 bytes

Is there a way to get a high quality printout of
an image without jagged lines. I tried capturing the
image with x-view and saving it as a color postscript.
I'm printing on a QMS 100 Colorscript printer  but
the output is unsatisfactory. The screen displays at
100dpi and the printer is capable of 300dpi's. I tried
using "tocolps <image.rgb> -p 300" but the image comes
out tiny. Any help would be appreciated. Thanks.



-- 
*******************************************************************************
Steve Smith                          | Internet: smith@icat.larc.nasa.gov
NASA Langley Research Center         |           s.l.smith@larc.nasa.gov
M/S 152                              | Voice: (804) 864-2004

Technical Details

Message-ID: <smith.728248655@news.larc.nasa.gov>

Path: arc1-ca.pugleaf.net!sparky!uunet!news.larc.nasa.gov!news.larc.nasa.gov!smith

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!news.larc.nasa.gov!news.larc.nasa.gov!smith
From: smith@icat.larc.nasa.gov (Steven L. Smith)
Newsgroups: comp.sys.sgi.graphics
Subject: printing images
Date: 28 Jan 93 19:17:35 GMT
Organization: NASA Langley Research Center, Hampton, VA  USA
Lines: 17
Message-ID: <smith.728248655@news.larc.nasa.gov>
NNTP-Posting-Host: icat.larc.nasa.gov