Midi device

Article View: comp.sys.sgi.hardware

Article #53

Back to comp.sys.sgi.hardware Previous Next

#53

From: Richard B. Mitchell
Date: Mon, 04 Jan 1993 21:15

19 lines
1084 bytes

Hi,

	I was wondering if anyone has hooked up a Midi device to a Sgi
Workstation.  I have an EPS-16 Plus Digital Sampling Workstation that
I would like to send Midi Code to from a SGI 340 VGX.  In particular,
I need to know if I can simply send the Midi bytes down the stream to
the device.  Secondly, is there a 9 pin to 5 pin connector that will
allow me to hook up the two

Thanks
Rich
--
-------------------------------------------------------------------------------
Richard B. Mitchell			 	       mitchell@linus.mitre.org
M/S K329
The Mitre Corp.					       (617) 271-8390
Burlington Rd
Bedford MA 01730

Technical Details

Message-ID: <MITCHELL.93Jan4161511@coltrane.linus.mitre.org>

Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!agate!linus!linus.mitre.org!linus!mitchell

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.sgi.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!agate!linus!linus.mitre.org!linus!mitchell
From: mitchell@linus.mitre.org (Richard B. Mitchell)
Subject: Midi device
Message-ID: <MITCHELL.93Jan4161511@coltrane.linus.mitre.org>
Sender: news@linus.mitre.org (NONUSER)
Nntp-Posting-Host: coltrane.mitre.org
Organization: Research Computer Facility, The MITRE Corporation, Bedford MA
Date: Mon, 4 Jan 1993 21:15:11 GMT
Lines: 19