where do I get +5v from the back of an Indigo?

Article View: comp.sys.sgi.hardware

Article #63

Back to comp.sys.sgi.hardware Previous Next

#63

From: J. Eric Townsend
Date: Wed, 06 Jan 1993 15:11

17 lines
1053 bytes


I've got a device that needs +5v, and is used to getting it from a
parallel port.  I'm hooking it up to a serial port instead, and
realized that there's apparently no +5v out anywhere on the back of
the Indigo.

Does anyone know of any +5v lines that I can tap into in/around the
back of the Indigo?  Say the keyboard, perhaps, or the AUI?

Thanks

--
J. Eric Townsend --  jet@nas.nasa.gov -- 415.604.4311 (DoD# 0378)
"It is the cunning of form to veil itself continually in the evidence
of content.  It is the cunning of the code to veil itself and to produce
itself in the obviousness of value." -- Baudrillard

Technical Details

Message-ID: <JET.93Jan6151104@boxer.nas.nasa.gov>

Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!agate!ames!data.nas.nasa.gov!data.nas.nasa.gov!jet

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.sgi.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!agate!ames!data.nas.nasa.gov!data.nas.nasa.gov!jet
From: jet@boxer.nas.nasa.gov (J. Eric Townsend)
Subject: where do I get +5v from the back of an Indigo?
Sender: news@nas.nasa.gov (News Administrator)
Organization: Numerical Aerodynamic Simulation, NASA Ames
Date: 6 Jan 93 15:11:04
Message-ID: <JET.93Jan6151104@boxer.nas.nasa.gov>
Lines: 17