ISDn connection to Internet with an Indy

Thread View: comp.sys.sgi.hardware

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by Helge Rene Urholm Tue, 08 Apr 1997 00:00

#171

Author: Helge Rene Urholm
Date: Tue, 08 Apr 1997 00:00

39 lines
1525 bytes

Ive got an Indy which I have problems connecting to Internett. I try
to connect to an ISP which has no authentication at all (no chap/pap
etc).

I have done everything according to the "book", and the machine calls,
isdnstat says I am connected (it disconnects after 1-2 minutes),
netstat disagrees with this and reports nothing
(except the ordinary networking), and I dont get any route (I think)
to the rest of the world.

Does anyone have any possible solutions to this problem?

I have installed patch 517 (IRIX 5.3).

--Config files--
#/etc/ppp.conf

out link				# same navn in /etc/uucp/systems
	localhost=0,0			# Dynamic allocation
	remotehost=0,0

	add_route


# Different parameters tried
#	-send_chap
#	-vj_comp
#	-acomp
#	-pcomp
#	-rx_accm

#	debug=4
----
#/etc/resolv.conf
domain link.no
nameserver 193.213.36.20
nameserver 193.213.36.21
hostresorder local bind

Re: ISDn connection to Internet with an Indy

#172

Author: Scott Henry
Date: Tue, 08 Apr 1997 00:00

38 lines
2119 bytes

>>>>> "H" == Helge Rene Urholm <helgeu@cybercomm.no> writes:

H> Ive got an Indy which I have problems connecting to Internett. I try
H> to connect to an ISP which has no authentication at all (no chap/pap
H> etc).

H> I have done everything according to the "book", and the machine calls,
H> isdnstat says I am connected (it disconnects after 1-2 minutes),
H> netstat disagrees with this and reports nothing
H> (except the ordinary networking), and I dont get any route (I think)
H> to the rest of the world.

H> Does anyone have any possible solutions to this problem?

H> I have installed patch 517 (IRIX 5.3).

H> --Config files--
H> #/etc/ppp.conf

H> out link				# same navn in /etc/uucp/systems
H> 	localhost=0,0			# Dynamic allocation
H> 	remotehost=0,0

H> 	add_route

This is unlikely to be the whole problem, but that blank line
between "remotehost=0,0" and "add_route" has to go...

A debug output log would be very helpful...  For more PPP info (PPP
is basically the same for ISDN and modems), see my Web pages:

        http://reality.sgi.com/scotth/dialup-support.html

--
 Scott Henry <scotth@sgi.com> /  Help! My disclaimer is missing!
 IRIX MTS,                   /  GIGO *really* means: Garbage in, Gospel Out
 Silicon Graphics, Inc      /  http://reality.sgi.com/scotth/

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads