Iris 2400 Turbo questions

Thread View: comp.sys.sgi.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Ron Peterson Wed, 06 Jan 1993 18:37

#60

Author: Ron Peterson
Date: Wed, 06 Jan 1993 18:37

19 lines
1310 bytes

I just became the (proud?) new owner of an Iris 2400 Turbo and have the 
following questions about it:

* What processor does it use, 68020?
* What are the specs for the 3D graphics performance?
* What type of hard disk does it use?  It doesn't seem to be SCSI; it has
  two edge connectors (one of about 36 contacts and one of about 16) as
  well as a power connector.  I'd like to get a 100M drive for it since
  the current drive is only 40M.  (If you have one to sell, I'm interested.)
* If the machine is configured for the 60Hz and 30Hz hi-res modes how do I
  change it to 60Hz and NTSC?  Does this entail flipping DIP switches or
  do I have to swap a card?
* The disk has been wiped of all the SGI provided graphics tools and
  example programs.  Can anyone supply me with a copy of them?
* Anyone have any memory, bitplanes, accessories (dial/button box), hard
  drive that they want to sell real cheap?

Please reply via email to
ron@vicorp.com or uunet!vicorp!ron

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads