🚀 go-pugleaf

jwag@moose.asd.sgi.com (Chris Wagner) writes:

>In article <BzDG1F.168@news.cso.uiuc.edu>, th9708@meibm8.cen.uiuc.edu (Todd Lee Henderson) writes:
>|> operator, installer, etc. is long gone.  I would like to find out how much
>|> system memory is in the machine, is there a command for this?  I'm sure it

>hinv(1) will tell you lots about your current hardware configuration

and ginv(1) will tell you alot about the graphics hardware configuration.
I've found it rather useful, at times.

Hmm, it seems that ginv isn't an SGI product, but it is "anywhere" (read
the source code!).

Here it is:

# -----------------  CUT HERE ----------------- 
# then stuff the remainder thru sh ('sh < this.file').
# 
# file Makefile 
sed -e 's/^\]//' -e '/<$/s/\<$//' << "++ENDFILE++" > Makefile
]ginv:
]	cc -o ginv ginv.c -lfm_s -lgl_s -lc_s
++ENDFILE++
# file ginv.c 
sed -e 's/^\]//' -e '/<$/s/\<$//' << "++ENDFILE++" > ginv.c
]/*
] *	ginv.c
] *
] *	ginv (Graphics Inventory)
] *
] *	v1.0,	May 1991
] *
] *	(c) 1991 Rodney Hoinkes
] *	Centre for Landscape Research
] *	University of Toronto
] *	rodney@dgp.utoronto.ca
] *
] *	This software is released under the conventions of
] *	'anyware', meaning you can put it anyware, do anything,
] *	or rm it as you please as long as you don't try to
] *	get money for it (good luck if you want to try!).
] *
] *	This software was written to test out the getgdesc
] *	function and to see what different hardware configurations
] *	look like to a graphics program that really wants to know.
] *  The following data was gathered from some machines I have
] *	access to for general info.  <
] *
] *	compile with: cc -o ginv ginv.c -lfm_s -lgl_s -lc_s
] *	stripping the executable will greatly reduce its size
] *	strip ginv
] *
] *	If there is interest, I am working on a version to inform
] *	the make process.
] *
] *	A machine-independent version of psgl (GL->Postscript) is also
] *	in the debugging stages since the current GL implementation
] *	differs depending which machine you compile on, not just what
] *	parameter set you use. This version does not require compile
] *	definitions, but determines machine at run-time.
] *
] *	If you have another type of
] *	machine NOT listed here, please email me the output from
] *	this program.
] *
] *	IRIS 4D/20TG
] *
] *	IRIS 4D Graphics Inventory (ginv v1.0)
] *	--------------------------------------
] *	Machine: 4DPIT running IRIX version 3.3
] *	1 Screen(s) Accessible on this machine.
] *	
] *	Screen Resolution:  1280 x 1024 pixels.
] *	Zbuffer Resolution: 0xFF800000 min  0x7FFFFF max.
] *	No Accumulation Buffer present.
] *	Alpha bitplanes in DoubleBuffered: 0, SingleBuffered: 0
] *	Red   bitplanes in DoubleBuffered: 4, SingleBuffered: 8
] *	Green bitplanes in DoubleBuffered: 4, SingleBuffered: 8
] *	Blue  bitplanes in DoubleBuffered: 4, SingleBuffered: 8
] *	Zbuffer  bitplanes present: 24
] *	Stencil  bitplanes present: 0
] *	Overlay  bitplanes present: 4
] *	PopUp    bitplanes present: 4
] *	Underlay bitplanes present: 4
] *	User-defined Clipping Planes present: 0
] *	antialiased points available in colormap
] *	antialiased points not available in RGB
] *	antialiased lines available in colormap
] *	antialiased lines not available in RGB
] *	antialiased polygons not available in RGB
] *	Number of verticies per polygon allowed: 256.
] *	
] *	FUNCTIONS AVAILABLE:
] *	logicop, readsource AUTO/FONT/BACK, readsource ZBUFFER, subpixel points, subpixel lines, subpixel po
] *	lygons. <
] *	
] *	FUNCTIONS NOT AVAILABLE:
] *	afunction, fogvertex, two-sided lighting, blendfunction, scrbox, stereo, texture-mapping, polymode, <
] *	64x64 patterns. <
] *
] *	IRIS 4D/70GT w/Alpha Planes
] *
] *	IRIS 4D Graphics Inventory (ginv v1.0)
] *	--------------------------------------
] *	Machine: 4DGT running IRIX version 3.3
] *	1 Screen(s) Accessible on this machine.
] *	
] *	Screen Resolution:  1280 x 1024 pixels.
] *	Zbuffer Resolution: 0x0 min  0x7FFFFF max.
] *	No Accumulation Buffer present.
] *	Alpha bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Red   bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Green bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Blue  bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Zbuffer  bitplanes present: 23
] *	Stencil  bitplanes present: 0
] *	Overlay  bitplanes present: 4
] *	PopUp    bitplanes present: 2
] *	Underlay bitplanes present: 4
] *	User-defined Clipping Planes present: 0
] *	antialiased points available in colormap
] *	antialiased points available in RGB
] *	antialiased lines available in colormap
] *	antialiased lines available in RGB
] *	antialiased polygons not available in RGB
] *	Number of verticies per polygon allowed: 256.
] *	
] *	FUNCTIONS AVAILABLE:
] *	blendfunction, readsource AUTO/FONT/BACK, readsource ZBUFFER, subpixel points, subpixel lines. <
] *	
] *	FUNCTIONS NOT AVAILABLE:
] *	afunction, logicop, fogvertex, two-sided lighting, scrbox, subpixel polygons, stereo, texture-mappin
] *	g, polymode, 64x64 patterns. <
] *
] *	IRIS 4D/310VGX - 5span
] *
] *	IRIS 4D Graphics Inventory (ginv v1.0)
] *	--------------------------------------
] *	Machine: 4DVGX running IRIX version 3.3
] *	1 Screen(s) Accessible on this machine.
] *	
] *	Screen Resolution:  1280 x 1024 pixels.
] *	Zbuffer Resolution: 0xFF800000 min  0x7FFFFF max.
] *	Software Accumulation Buffer with 16 bitplanes per colour component.
] *	Alpha bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Red   bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Green bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Blue  bitplanes in DoubleBuffered: 8, SingleBuffered: 8
] *	Zbuffer  bitplanes present: 24
] *	Stencil  bitplanes present: 8
] *	Overlay  bitplanes present: 8
] *	PopUp    bitplanes present: 2
] *	Underlay bitplanes present: 8
] *	User-defined Clipping Planes present: 6
] *	antialiased points available in colormap
] *	antialiased points available in RGB
] *	antialiased lines available in colormap
] *	antialiased lines available in RGB
] *	antialiased polygons available in RGB
] *	Number of verticies per polygon allowed: 256.
] *	
] *	FUNCTIONS AVAILABLE:
] *	afunction, logicop, fogvertex, two-sided lighting, blendfunction, readsource AUTO/FONT/BACK, readsou
] *	rce ZBUFFER, scrbox, subpixel points, subpixel lines, subpixel polygons, stereo, texture-mapping, po
] *	lymode. <
] *	
] *	FUNCTIONS NOT AVAILABLE:
] *	64x64 patterns. <
] *
] */
]#include <stdio.h>
]#include <gl.h>
]#include <device.h>
]#include <fmclient.h>

]main(argc,argv)
]int argc;
]char *argv[];
]{
]	register int i,j,c;
]	short machinetype;
]	float softversion;
]	char version[40],software[6],machine[6];
]	char buf[50][255];
]	char opbuf[50][40], yes[4000], no[4000];
]	char op[50];
]	char showfonts = 0;

]	/* check commandline parameters */
]	if(argc == 2) {
]		if(!strcmp(argv[1],"-h")) {
]			printf("usage: %s [-h] [-f]\n",argv[0]);
]			printf("\t-h\tThis help menu.\n");
]			printf("\t-f\tShow list of installed fonts.\n");
]			exit(1);
]		}
]		else if(!strcmp(argv[1],"-f")) showfonts = 1;
]	}
]	/* open program window and setup display settings */
]	noport();

]	foreground();
]	winopen("SetupCheck");
]	gconfig();

]	/* get machine information */
]	gversion(version);
]	for(i=2;i<strlen(version);++i){
]		if(version[i]=='-') break;
]		machine[i-2]=version[i];
]	}
]	machine[i-2]='\0';
]	software[0]=version[i+1];
]	software[1]=version[i+2];
]	software[2]=version[i+3];
]	software[3]='\0';
]	softversion = atof(software);

]	printf("IRIS 4D Graphics Inventory (ginv v1.0)\n");
]	printf("--------------------------------------\n");
]	printf("Machine: %s running IRIX version %s\n",machine,software);

]	printf("%d Screen(s) Accessible on this machine.\n\n",getgdesc(GD_NSCRNS));

]	i = 0;
]	sprintf(buf[i++],"Screen Resolution:  %d x %d pixels.",getgdesc(GD_XPMAX),getgdesc(GD_YPMAX));
]	sprintf(buf[i++],"Zbuffer Resolution: 0x%X min  0x%X max.",getgdesc(GD_ZMIN),getgdesc(GD_ZMAX));

]	if(getgdesc(GD_BITS_ACBUF_HW))
]		sprintf(buf[i++],"Hardware Accumulation Buffer with %d bitplanes per colour component.",getgdesc(GD_BITS_ACBUF_HW));
]	else if(getgdesc(GD_BITS_ACBUF))
]		sprintf(buf[i++],"Software Accumulation Buffer with %d bitplanes per colour component.",getgdesc(GD_BITS_ACBUF));
]	else
]		strcpy(buf[i++],"No Accumulation Buffer present.");

]	sprintf(buf[i++],"Alpha bitplanes in DoubleBuffered: %d, SingleBuffered: %d",getgdesc(GD_BITS_NORM_DBL_ALPHA),getgdesc(GD_BITS_NORM_SNG_ALPHA));
]	sprintf(buf[i++],"Red   bitplanes in DoubleBuffered: %d, SingleBuffered: %d",getgdesc(GD_BITS_NORM_DBL_RED),getgdesc(GD_BITS_NORM_SNG_RED));
]	sprintf(buf[i++],"Green bitplanes in DoubleBuffered: %d, SingleBuffered: %d",getgdesc(GD_BITS_NORM_DBL_GREEN),getgdesc(GD_BITS_NORM_SNG_GREEN));
]	sprintf(buf[i++],"Blue  bitplanes in DoubleBuffered: %d, SingleBuffered: %d",getgdesc(GD_BITS_NORM_DBL_BLUE),getgdesc(GD_BITS_NORM_SNG_BLUE));
]	sprintf(buf[i++],"Zbuffer  bitplanes present: %d",getgdesc(GD_BITS_NORM_ZBUFFER));
]	sprintf(buf[i++],"Stencil  bitplanes present: %d",getgdesc(GD_BITS_STENCIL));
]	sprintf(buf[i++],"Overlay  bitplanes present: %d",getgdesc(GD_BITS_OVER_SNG_CMODE));
]	sprintf(buf[i++],"PopUp    bitplanes present: %d",getgdesc(GD_BITS_PUP_SNG_CMODE));
]	sprintf(buf[i++],"Underlay bitplanes present: %d",getgdesc(GD_BITS_UNDR_SNG_CMODE));
]	sprintf(buf[i++],"User-defined Clipping Planes present: %d",getgdesc(GD_CLIPPLANES));
]	if(getgdesc(GD_PNTSMOOTH_CMODE))
]		sprintf(buf[i++],"antialiased points available in colormap");
]	else
]		sprintf(buf[i++],"antialiased points not available in colormap");
]	if(getgdesc(GD_PNTSMOOTH_RGB))
]		sprintf(buf[i++],"antialiased points available in RGB");
]	else
]		sprintf(buf[i++],"antialiased points not available in RGB");
]	if(getgdesc(GD_LINESMOOTH_CMODE))
]		sprintf(buf[i++],"antialiased lines available in colormap");
]	else
]		sprintf(buf[i++],"antialiased lines not available in colormap");
]	if(getgdesc(GD_LINESMOOTH_RGB))
]		sprintf(buf[i++],"antialiased lines available in RGB");
]	else
]		sprintf(buf[i++],"antialiased lines not available in RGB");
]	if(getgdesc(GD_POLYSMOOTH))
]		sprintf(buf[i++],"antialiased polygons available in RGB");
]	else
]		sprintf(buf[i++],"antialiased polygons not available in RGB");
]	if(getgdesc(GD_NVERTEX_POLY) == GD_NOLIMIT)
]		sprintf(buf[i++],"Number of verticies per polygon allowed: Unlimited.");
]	else
]		sprintf(buf[i++],"Number of verticies per polygon allowed: %d.",getgdesc(GD_NVERTEX_POLY));

]	j = 0;
]	sprintf(opbuf[j],"afunction");
]	if(getgdesc(GD_AFUNCTION))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"logicop");
]	if(getgdesc(GD_LOGICOP))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"fogvertex");
]	if(getgdesc(GD_FOGVERTEX))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"two-sided lighting");
]	if(getgdesc(GD_LIGHTING_TWOSIDE))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"blendfunction");
]	if(getgdesc(GD_BLEND))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"readsource AUTO/FONT/BACK");
]	if(getgdesc(GD_READSOURCE))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"readsource ZBUFFER");
]	if(getgdesc(GD_READSOURCE_ZBUFFER))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"scrbox");
]	if(getgdesc(GD_SCRBOX))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"subpixel points");
]	if(getgdesc(GD_SUBPIXEL_PNT))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"subpixel lines");
]	if(getgdesc(GD_SUBPIXEL_LINE))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"subpixel polygons");
]	if(getgdesc(GD_SUBPIXEL_POLY))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"stereo");
]	if(getgdesc(GD_STEREO))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"texture-mapping");
]	if(getgdesc(GD_TEXTURE))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"polymode");
]	if(getgdesc(GD_POLYMODE))
]		op[j++] = 1;
]	else
]		op[j++] = 0;

]	sprintf(opbuf[j],"64x64 patterns");
]	if(getgdesc(GD_PATSIZE_64))
]		op[j++] = 1;
]	else
]		op[j++] = 0;



]	for(c=0;c<j;++c) {
]		if(op[c]) {
]			strcat(yes,opbuf[c]);
]			strcat(yes,", ");
]		} else {
]			strcat(no,opbuf[c]);
]			strcat(no,", ");
]		}
]	}

]	for(c=0;c<i;++c) puts(buf[c]);

]	yes[strlen(yes)-2] = '.';
]	no[strlen(no)-2] = '.';
]	printf("\nFUNCTIONS AVAILABLE:\n");
]	puts(yes);
]	printf("\nFUNCTIONS NOT AVAILABLE:\n");
]	puts(no);


]	if(showfonts) {
]		printf("\nINSTALLED FONTS\n\n");
]		fmenumerate(puts);
]	}
]}
++ENDFILE++
-- 
-- 
Stephen Samuel 		(604)822-9248		samuel@cs.ubc.ca
The first prerequisite to winning is playing the game.