🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun.hardware
Article #2267

HELP! SS2 won't boot w/ Artecon SBus Expander?!?

#2267
From: Jochen Bern
Date: Wed, 27 Jan 1993 03:37
47 lines
2807 bytes
Does anybody out there use an Artecon SBus Expansion Box on a SPARCstation 2?
It seems that I can't get that up and running!

My Configuration:
   HAMstation2X (SPARCstation 2 Clone), 3 SBus Slots
   SunOS 4.1.2
   Slot 1 was SPARCprinter Card, *should* contain the XBox's Adapter Card now
   Slot 2 is Prestoserve Card (inserted, but not in Use yet)
   Slot 3 is cgsix
   Artecon SB-6000X SBus Expansion Box (six Slots, no Drive Bay)
   I introduced the XBox Adapter Card into Slot 1 and connected it to the Box,
   put a Power Cord to the Box, no other Wiring

My Problem:
   When I try to reboot the System, it blinks the LEDs as usual until only
   Scroll Lock and Num Lock are lit. Normally, it should take some Seconds,
   then clear the LEDs and display the (white) Screen. With the XBox, nothing
   happens, the LEDs stay on and the Screen black.

My Struggle:
1. I tried to move the Adapter Card to Slot 2. No Effect.
2. I tried to change the XBox Jumpers (other SBus Clock Speed). No Effect.
   (The Manual states "Jumpers numbered this Way", my Board denotes Numbers
   just the other Way :-/ )
3. I removed the XBox, booted and installed the Software IN ADVANCE.
   No Effect.
4. I disconnected the Box from the Adapter Card and booted. It booted fine,
   but the 'fw' Software refused to configure an absent Box. (Note that, if
   I addressed Slot 1, it said "No SB in current Slot 1", while the others
   resulted in "No SB in Slot nn"!)

My Guesses:
1. Hardware Damage?
2. Either Artecon or Hamilton not complying to the SBus Standard?
3. Software got screwed up on first unsuccessful Attempt, now stuck?
4. XBox needs to be connected to SCSI Daisychain? (There are two SCSI Jacks
   on the XBox, but the Manuals don't say what to do with them, so I left
   them unused. Hell, nobody told me about SCSI Jacks, I don't even have
   the additional Cable!)

ALL & ANY HELP WELCOME! Thanx,
								J. Bern
-- 
 /  \  I hate NN rejecting .sigs >4 lines. Even though *I* set up this one. /\
/ J. \ EMail: bern@[TI.]Uni-Trier.DE / ham: DD0KZ  / More Infos on me from /  \
\Bern/ X.400 Mail: S=BERN;P=Uni-Trier;A=dbp;C=de  /   X.400 Directory, see \  /
 \  /  Zurmaiener Str. 98-100, D-W-5500 Trier    /     X.29 # 45050230303.  \/
Technical Details
Message-ID: <bern.728105857@kleopatra>
Path: arc1-ca.pugleaf.net!sparky!uunet!math.fu-berlin.de!ira.uka.de!Germany.EU.net!rzultr.uni-trier.de!TI.Uni-Trier.DE!bern

Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.sun.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!math.fu-berlin.de!ira.uka.de!Germany.EU.net!rzultr.uni-trier.de!TI.Uni-Trier.DE!bern
From: bern@Uni-Trier.DE (Jochen Bern)
Subject: HELP! SS2 won't boot w/ Artecon SBus Expander?!?
Message-ID: <bern.728105857@kleopatra>
Followup-To: poster
Originator: bern@kleopatra
Sender: news@rzultr.uni-trier.de (USENET News System)
Organization: Theor. CS, FB IV / CS, Univ. of Trier, Germany (Internet TI.Uni-Trier.DE)
Date: Wed, 27 Jan 1993 03:37:37 GMT
Lines: 47