Emulex SCSI=>ESDI question

Article View: comp.sys.sun.hardware

Article #2372

Back to comp.sys.sun.hardware Previous Next

#2372

From: Vedran Luka Degoricija
Date: Fri, 11 Aug 1995 19:58

14 lines
1070 bytes

I have an Emulex MU2110402 SCSI=>ESDI bridge, with which I can run ESDI 
devices on a SCSI bus.

Does anyone have any documentation on these or know where I could get 
some?  The problem is that the SCSI controller on a sun4c or an 
adaptec/ncr on a PC does not even notice it on the bus!

One thing that is noticeable is that, out of the red and the green LED's on 
the Emulex board, the green one continuously flashes?  Can SCSI id be set 
on these?  There seem to be some jumpers and certainly a block of 
dipswitches but no docs!

I also seem to remember that it supported two ESDI drives as multiple 
LUN's on a common id. The board came from a shoebox sun enclosure.

Technical Details

Message-ID: <40gcoq$d8b@agate.berkeley.edu>

Path: arc1-ca.pugleaf.net!uclink.berkeley.edu!ved

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!uclink.berkeley.edu!ved
From: ved@uclink.berkeley.edu (Vedran Luka Degoricija)
Newsgroups: comp.sys.sun.hardware,comp.periphs.scsi
Subject: Emulex SCSI=>ESDI question
Date: 11 Aug 1995 19:58:18 GMT
Organization: University of California, Berkeley
Message-ID: <40gcoq$d8b@agate.berkeley.edu>
NNTP-Posting-Host: uclink.berkeley.edu
X-Newsreader: TIN [version 1.2 PL2]