Article View: comp.sys.sun.hardware
Article #2630Re: Sparc 2 / Sol 7
From: Craig Dewick
Date: Sat, 15 Apr 2000 00:00
Date: Sat, 15 Apr 2000 00:00
26 lines
1699 bytes
1699 bytes
davidwhipple@yahoo.com writes:
>Hey all,
>I have a Sparc 2 (32MB, 2GB) that loads the OS from the CD-ROM ok, but
>after the entire setup, the machine reboots as it should, but hangs,
>trying to boot from the local disk...
Where in the boot sequence does it hang? The point at which the machine
stops tends to determine what the problem might be.
>Is there something I should have done different for the machine? (I was
>told there is a jumper I should change on the motherboard?)
No, there aren't any jumpers. Make sure your SCSI bus is correctly
terminated though - that's often a cause of SCSI bus lockups and related
errors.
Regards,
Craig.
--
Sun Ripened Kernels | Surplus and Pre-loved Sun Microsystems Equipment
http://www.sunrk.com.au | Based in Waterfall (S/E Sydney), NSW, Australia.
Phone: 02-9520-2547 | Founded in 1996 - Operated by Craig Dewick
GSM: 04-1115-8574 | Email: craig@sunrk.com.au or craig@zeta.org.au
Technical Details
Message-ID:
<8d8kcn$jud$1@jedi.apana.org.au>Path:
arc1-ca.pugleaf.net!unknown!not-for-mailReferences:
<8d271d$qda$1@nnrp1.deja.com>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: f4671,3a414fe50bdfbb33 X-Google-Attributes: gidf4671,public X-Google-Thread: 10d053,e4439bf06658119a,start X-Google-Attributes: gid10d053,public From: cd@lios.apana.org.au (Craig Dewick) Subject: Re: Sparc 2 / Sol 7 Date: 2000/04/15 Message-ID: <8d8kcn$jud$1@jedi.apana.org.au> X-Deja-AN: 611375645 References: <8d271d$qda$1@nnrp1.deja.com> X-Complaints-To: postmaster@jedi.apana.org.au X-Trace: jedi.apana.org.au 955765975 20429 203.14.152.52 (15 Apr 2000 02:32:55 GMT) Organization: Core Matrix Foundation, t/a the Jedi News Exchange NNTP-Posting-Date: 15 Apr 2000 02:32:55 GMT Newsgroups: comp.sys.sun.hardware,aus.computers.sun