🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun.hardware
Article #3043

Re: Sparc 2 newbie...

#3043
From: William F. Wyatt
Date: Wed, 15 Jul 1998 00:00
56 lines
2791 bytes
Craig Dewick wrote:
[...]
> >I've gone over the hardware guide I found
> >at www.sunhelp.com, and am not sure if the banks are consecutive or
> >interleaved.
> 
> They are interleaved, in this order:
> 
>     SCSI connectors
> 
>        3       3
>        1       1
>        2       2
>        0       0
> 
>        3       3
>        1       1
>        2       2
>        0       0
> 
>     Sbus connectors
> 
> (looking from the back of the machine)

From the Sun hardware FAQ, 

                THERE IS SOME DISPUTE OVER WHICH SLOTS BELONG TO WHICH
                BANKS, or alternatively what order to fill them. The Sun
                Field Engineer Handbook for 12/15/93 says that the banks
                are in order as shown above but doesn't give a fill
                order. Other sources agree that banks are in order 0, 2,
                1, 3, and should be filled in numerical order, which is
                interestingly equivalent to a *fill* order of 0, 2, 1, 3
                with the banks in numerical order as shown -- and that
                was the fill order of near relatives (the SPARCstation 1
                and 1+).

                        Nearest disk connectors

                                         bank
                    byte  ----U0317---- 3    3 ----U0318---- byte
                        2 ----U0315---- 2    2 ----U0314----     1
                    bits  ----U0308---- 1    1 ----U0310---- bits
                     8-15 ----U0307---- 0    0 ----U0309----  16-23

                    byte  ----U0316---- 3    3 ----U0319---- byte
                        3 ----U0320---- 2    2 ----U0313----     0
                    bits  ----U0321---- 1    1 ----U0312---- bits
                      0-7 ----U0322---- 0    0 ----U0311----  24-31

                        Nearest SBus connectors


-- 
Bill Wyatt (REMOVEwyattTHIS@cfa0.harvard.edu) "remove this" for email
   Smithsonian Astrophysical Observatory  (Cambridge, MA, USA)
Technical Details
Message-ID: <35ACCFBC.1662@cfa.harvard.edu>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail
References: <35aad4f7.48307890@news.pipeline.com> <6oh09u$50s$1@lios.apana.org.au>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: f4671,2e6927ff44596b74
X-Google-Attributes: gidf4671,public
X-Google-Thread: 10d053,2071a95a787cedd8
X-Google-Attributes: gid10d053,public
X-Google-Thread: f88e1,2071a95a787cedd8
X-Google-Attributes: gidf88e1,public
From: "William F. Wyatt" <REMOVEwyattTHIS@cfa.harvard.edu>
Subject: Re: Sparc 2 newbie...
Date: 1998/07/15
Message-ID: <35ACCFBC.1662@cfa.harvard.edu>
X-Deja-AN: 371713307
Content-Transfer-Encoding: 7bit
References: <35aad4f7.48307890@news.pipeline.com> <6oh09u$50s$1@lios.apana.org.au>
Content-Type: text/plain; charset=us-ascii
Organization: Harvard-Smithsonian Center for Astrophysics
Mime-Version: 1.0
Newsgroups: comp.sys.sun.hardware,aus.computers.sun,alt.sys.sun