Re: SLC memory?

Article View: comp.sys.sun.hardware

Article #3220

Back to comp.sys.sun.hardware Previous Next

#3220

From: Craig Dewick
Date: Tue, 11 Feb 1997 00:00

22 lines
1553 bytes

In <5dokg4$mdh@NNTP.MsState.Edu> jopasm@walt.cs.msstate.edu (Jonathan Smith) writes:

>Can a SLC use standard 72 pin simms?  I realize that it will require
parity memory, but i have 2 4 meg. 80ns parity (should be true parity)
simms that I'd like >to use in itk, but I don't want to risk blowing up
either the SLC's mainboard or the simms.  Any comments/suggestions, or
pointers to information would be appreciated.  Thanks. 

Those SIMM's should work fine. As long as they are true parity SIMM's
(they'll have every chip location filled on the PCB if they are
full-parity SIMM's) they will work. Unfortunately SLC's only work with 4
meg SIMM's. You need to upgrade to an ELC to use 16 meg 72 pin SIMM's

Regards,

Craig.
-- 
        Craig Dewick - craig@zeta.org.au - http://www.zeta.org.au/~craig  
            Professional Train Driver. Located in Sydney, Australia.
          Sun Ripened Kernels - http://www.zeta.org.au/~craig/srk.html
                Surplus and pre-loved Sun Microsystems equipment.

Technical Details

Message-ID: <5dp3nc$7km@godzilla.zeta.org.au>

Path: arc1-ca.pugleaf.net!unknown!not-for-mail

References: <5dokg4$mdh@NNTP.MsState.Edu>

Show Full Headers

Complete Article Headers

X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: f4671,b95af5cb28f30711
X-Google-Attributes: gidf4671,public
X-Google-Thread: 10d053,d144859cd9c46db,start
X-Google-Attributes: gid10d053,public
From: craig@zeta.org.au (Craig Dewick)
Subject: Re: SLC memory?
Date: 1997/02/11
Message-ID: <5dp3nc$7km@godzilla.zeta.org.au>
X-Deja-AN: 217988841
references: <5dokg4$mdh@NNTP.MsState.Edu>
organization: Kralizec Dialup Unix Sydney, +61-2-837-1183 V.32bis
newsgroups: comp.sys.sun.hardware,aus.computers.sun

Reply to Parent Message