Article View: comp.sys.sun.hardware
Article #3293Re: 13W3->BNC cable for MG2
From: Craig Dewick
Date: Thu, 24 Oct 1996 00:00
Date: Thu, 24 Oct 1996 00:00
25 lines
1654 bytes
1654 bytes
In <326E9EF2.28A4@microhertz.njit.edu> Brian Toscano <brian@microhertz.njit.edu> writes:
>I've got a SS1+ with a MG2 (13W3 connector) framebuffer. I'd like to
>connect it to my Sony 20SE2T multiscan monitor (has HD15 and BNC
>inputs).
>I friend gave me a 13W3->4BNC cable, but the monitor has all sorts of
>sync problems with it. We tested out pins 5 & 10 and the composite
>sync BNC with a Fluke multimeter and all seems well.
The mg2 is a greyscale mono framebuffer, and apparently (I've never had
anything to do with greyscale framebuffers or greyscale monitors),
although they use the same connector as later colour frame buffers, they
don't output signals that will drive colour monitors. Someone who has
experience with this might liek to confirm or deny what I've said.
Regards,
Craig.
--
Craig Dewick - craig@zeta.org.au - http://www.zeta.org.au/~craig
Professional Train Driver. Located in Sydney, Australia.
Sun Ripened Kernels - http://www.zeta.org.au/~craig/srk.html
Surplus and pre-loved Sun Microsystems equipment.
Technical Details
Message-ID:
<54mh05$n69@godzilla.zeta.org.au>Path:
arc1-ca.pugleaf.net!unknown!not-for-mailReferences:
<326E9EF2.28A4@microhertz.njit.edu>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: f4671,3777d599a33f0e4d X-Google-Attributes: gidf4671,public X-Google-Thread: 10d053,745f677207d9e121,start X-Google-Attributes: gid10d053,public From: craig@zeta.org.au (Craig Dewick) Subject: Re: 13W3->BNC cable for MG2 Date: 1996/10/24 Message-ID: <54mh05$n69@godzilla.zeta.org.au> X-Deja-AN: 191615000 references: <326E9EF2.28A4@microhertz.njit.edu> organization: Kralizec Dialup Unix Sydney, +61-2-837-1183 V.32bis newsgroups: comp.sys.sun.hardware,aus.computers.sun