🚀 go-pugleaf

In <yd5ybm2bqc0.fsf@corto.laas.fr> marc@corto.laas.fr (Marc Vaisset) writes:

>> I have two alternative tools for extracting SIMM's. One is a sheetmetal
>> scribing tool which has a 90 degree bend at one end. Insert the tip in the
>> hole in the SIMM's PCB, and use the bend to provide leverage against the
>> plastic of the socket. Do this at both ends and voila! One removed SIMM! 

>I do the same for a couple of years and I'm still alive. My tool is
>the little key to drive screws on the old SUN triple Europe VME
>boards. I think it's the unique safe way to remove these SIMMS.

Hmmm, I've never tried that one though. But I agree, the 2mm hex keys are
a good idea. I run a 19" rack-mounted 4/280 here at home (my current
server), so I have lots of use for a 2mm hex key anyway, and I always have
a couple around. 

However do you find that a little right-angled hex key gives enough 
leverage? 

Regards,

Craig.
-- 
             Craig Dewick. Send email to 'cdewick@jedi.apana.org.au'
                 The Core Matrix Foundation - Sydney, Australia
                        http://jedi.apana.org.au/core.html
 Always striving for a secure long-term future in an insecure short-term world