🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun.hardware
Article #3331

Re: A 4/4xx or 6xx VME CPU in a 4/110 chassis... any thoughts?

#3331
From: Steve Cranage
Date: Fri, 07 Jun 1996 00:00
30 lines
1975 bytes
In article <4p5k0m$2q3@saturn.tlug.org>, mfrisch@saturn.tlug.org (Mike
Frisch) wrote:

> Casper H.S. Dik (casper@fwi.uva.nl) wrote:
> : The 4/6xx board should give you all you need, it has:
> : 
> :       4 Sbus slots
> :       2 Mbus slots
> :       32 SIMM slots (for a total of 32*16 MB, install in 16 SIMMs at a time)
> :       and you rstandard ethernet & kbd/mouse & audio & ttya/b & SCSI-2
> 
>         I assume the 4/6xx is supported by Solaris 2.5?  Is that fast
> SCSI-2 or just plain SCSI-2?  What kind of performance does it offer
> compared to later SPARCstations?  This sounds like a very interesting
> upgrade for my 4/110. 
> 
> Mike.
The 4/600 uses mbus, so it's as fast as the fastest super or hyper sparc
CPU you can afford. The SCSI port is the same as the built-in ports on a
later model sparcstation 1, 2, etc, (just SCSI2, not fast/narrow), but you
can put up to 4 sbus SCSI cards on the system board, and they can be
fast/wide if you want.

The 600 system board is not a cheap upgraade, or one that's easy to find.
It took me a few months to locate mine, but was well worth it.

-- 
Stephen Cranage, Storage Technology Corp.
Colorado Springs, CO     719-548-4740
Technical Details
Message-ID: <Steve_Cranage-0706961047520001@129.80.243.63>
Path: arc1-ca.pugleaf.net!unknown!not-for-mail
References: <4p1i9s$5tkiyt@aztech.ba.md.us> <4p33g0$1ga@godzilla.zeta.org.au> <4p3epd$jvr@mail.fwi.uva.nl> <4p5k0m$2q3@saturn.tlug.org>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: f4671,e8e4ddd0ecbc5a3d
X-Google-Attributes: gidf4671,public
X-Google-Thread: f88e1,e8e4ddd0ecbc5a3d
X-Google-Attributes: gidf88e1,public
X-Google-Thread: 10d053,a4952529fbb3804b
X-Google-Attributes: gid10d053,public
From: Steve_Cranage@stortek.com (Steve Cranage)
Subject: Re: A 4/4xx or 6xx VME CPU in a 4/110 chassis... any thoughts?
Date: 1996/06/07
Message-ID: <Steve_Cranage-0706961047520001@129.80.243.63>
X-Deja-AN: 159026684
sender: news@stortek.com
references: <4p1i9s$5tkiyt@aztech.ba.md.us> <4p33g0$1ga@godzilla.zeta.org.au> <4p3epd$jvr@mail.fwi.uva.nl> <4p5k0m$2q3@saturn.tlug.org>
organization: StorageTek
newsgroups: comp.sys.sun.hardware,alt.sys.sun,aus.computers.sun