full duplex/half duplex protocols

Article View: comp.sys.sun.hardware

Article #78

Back to comp.sys.sun.hardware Previous Next

#78

From: Kam Komeyli
Date: Sun, 01 Nov 1992 18:12

23 lines
1131 bytes

Hello Netters: 

    Does anyone know whether the "Half duplex/ Full duplex" protocol sources

    are available for the sun sparc? 
    I am interseted in connecting the sun sparc station through the rs-232C

    asynchronous serial interface to the Allen bradley 1770-KF2 through the

    above protocols. My ultimate goal is to take the signal from the sun
    and convert it to the data highway signal through the 1770-KF2 and drive

    the Allen Bradley's Programmable Logic Controller PLC-5.

    Any Help on this or further reference is greatly appreciated. 
    Please respond to (EMAIL: kxk13@po.cwru.edu)
    If sufficient interest, I will post to this newsgroup. 

    Thankyou. 

    Kam Komeyli
--

Technical Details

Message-ID: <1d16mnINN3a@usenet.INS.CWRU.Edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!agate!usenet.ins.cwru.edu!po.CWRU.Edu!kxk13

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!agate!usenet.ins.cwru.edu!po.CWRU.Edu!kxk13
From: kxk13@po.CWRU.Edu (Kam Komeyli)
Newsgroups: comp.sys.sun.hardware
Subject: full duplex/half duplex protocols
Date: 1 Nov 1992 18:12:39 GMT
Organization: Case Western Reserve University, Cleveland, Ohio (USA)
Lines: 23
Message-ID: <1d16mnINN3a@usenet.INS.CWRU.Edu>
NNTP-Posting-Host: thor.ins.cwru.edu