Re: Changing parameters on a 3/60?

Article View: comp.sys.sun.hardware

Article #8

Back to comp.sys.sun.hardware Previous Next

From: Sean Kennedy
Date: Tue, 27 Oct 1992 01:11

17 lines
1136 bytes

My best Recommendation is to contact your "local" Sun representatives
and ask lotsa questions. I wouldn't get where I am today if I didn't...


*****************************************************************
*			Ack,					*
*		_    /| Pbthbt!   Bill says:                    *
*		\'o.O`	  / 					*
*		~(___)~		These are my opinions and no	*
*		   U	    one elses here at "Slumber Cottage" *
*****************************************************************
*kennedy@feline!lsuc!lsuc.on.CA					*
*CpyRght Savage Henrii Systems...				* 
*Sean Kennedy -(newuser.idiot!)- vox (705) 435-7475		* 
*R.R.#1 Egbert, Ontario, CANADA -(which includes Quebec.)-	*
*****************************************************************

Technical Details

Message-ID: <1992Oct27.011140.25285@feline.uucp>

Path:

arc1-ca.pugleaf.net!sparky!uunet!kithrup!hoptoad!pacbell.com!sgiblab!zaphod.mps.ohio-state.edu!uunet.ca!unixbox!telly!robohack!feline!kennedy

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.sun.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!kithrup!hoptoad!pacbell.com!sgiblab!zaphod.mps.ohio-state.edu!uunet.ca!unixbox!telly!robohack!feline!kennedy
From: kennedy@feline.uucp (Sean Kennedy)
Subject: Re: Changing parameters on a 3/60?
Message-ID: <1992Oct27.011140.25285@feline.uucp>
Organization: Humber College Technology Dept.
Date: Tue, 27 Oct 1992 01:11:40 GMT
Lines: 18