That nasty F1 key

Article View: comp.sys.sun

Article #10127

#10127

From: Glenn Roberts
Date: Wed, 11 Jan 1989 03:25

18 lines
1382 bytes

I thought this had been covered in previous Sun-Spots issues but I grepped
through volumes 6 & 7 and couldn't find the answer.

How can I get the F1 key to send out a "normal" escape sequence in a
SunView window?  I am using tn3270 to access IBM's PROFS system and I want
F1 through F12 on my 386i to map to the appropriate keys.  F2 through F12
are no problem but F1 is intercepted by SunView to make the window CAPS
only (a useless "feature" as far as I am concerned!).

Someone said in a previous Sun Spots that this can be done in the .ttyswrc
file but the SunView manual explicitly states that F1 CANNOT be remapped
this way.  The programs in previous Sun Spots are all oriented around
defeating the CAPS lock key (the one labeled Caps), not the F1 key.

Any help would be appreciated.

- Glenn Roberts, The MITRE Corp., McLean VA  (703)-883-6820
  gfr%wolfgang@gateway.mitre.org

Technical Details

Message-ID: <8812301611.AA01248@wolfgang.mitre.org.mitre.org>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!ames!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!ames!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: gfr@wolfgang.mitre.org (Glenn Roberts)
Newsgroups: comp.sys.sun
Subject: That nasty F1 key
Message-ID: <8812301611.AA01248@wolfgang.mitre.org.mitre.org>
Date: 11 Jan 89 03:25:14 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 18
Approved: Sun-Spots@rice.edu
Original-Date: Fri, 30 Dec 88 11:11:17 EST
X-Sun-Spots-Digest: Volume 7, Issue 93, message 13 of 18