Disk Formatting Problems (h

Article View: comp.sys.sun

Article #10187

#10187

From: Russell Brand
Date: Thu, 12 Jan 1989 12:28

7 lines
842 bytes

I am trying to add a maxtor 4380 (e?) to my 3/50.  I have an emulex
controller and a micropolis 1335 that are working on it properly.  When I
try to do surface analysis or format the new drive (using stand/diag) I
get lots of "sense errors" and "illegal parameter" errors.

The jumpering is right, I have checked the cables and addresses.  What
else should I do?

Technical Details

Message-ID: <8901050638.AA02017@wuthel.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!ames!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!ames!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: brand@lll-crg.llnl.gov (Russell Brand)
Newsgroups: comp.sys.sun
Subject: Disk Formatting Problems    (h
Message-ID: <8901050638.AA02017@wuthel.UUCP>
Date: 12 Jan 89 12:28:31 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 7
Approved: Sun-Spots@rice.edu
Original-Date: Wed, 4 Jan 89 22:38:17 PST
X-Sun-Spots-Digest: Volume 7, Issue 97, message 7 of 15