Article View: comp.sys.sun
Article #10311Boot Hanging
From: 6394
Date: Mon, 16 Jan 1989 05:21
Date: Mon, 16 Jan 1989 05:21
14 lines
839 bytes
839 bytes
When booting my Sun 3/60 I get the following two lines: EEPROM boot device...sd(0,0,0) Load: sd(0,0,0)boot At this point the system hangs, going no further. I suspect corruption on the disk. Hardware seems to be good, passed all the checks, anyway. Any suggestions would be greatly appreciated. Gene Pantalone (201 457 6294) gene@pisc2b.UUCP (6394) ---or--- attmail!pantalone
Technical Details
Message-ID:
<591@pisc2b.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!lll-winken!ames!xanth!ukma!mailrus!cornell!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!lll-winken!ames!xanth!ukma!mailrus!cornell!uw-beaver!rice!sun-spots-request From: gene@pisc2b.UUCP (6394) Newsgroups: comp.sys.sun Subject: Boot Hanging Message-ID: <591@pisc2b.UUCP> Date: 16 Jan 89 05:21:23 GMT Sender: usenet@rice.edu Organization: Sun-Spots Lines: 14 Approved: Sun-Spots@rice.edu Original-Date: 11 Jan 89 13:31:17 GMT X-Sun-Spots-Digest: Volume 7, Issue 105, message 15 of 22