Using Maxtor 4380E on 3/50 with 3.5

Article View: comp.sys.sun

Article #10354

#10354

From: Russell Brand
Date: Wed, 18 Jan 1989 04:45

9 lines
789 bytes

Thanks for all of the helpful suggestions.

We now it have it working using a few fewer cylinders and sectors than the
specification sheet suggested.

# dkinfo sd1
sd1: Emulex MD21 controller at addr 140000, unit # 1
1218 cylinders 15 heads 33 sectors/track
...

Technical Details

Message-ID: <8901130554.AA16420@wuthel.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!lll-winken!ames!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!attcan!uunet!lll-winken!ames!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: brand@lll-crg.llnl.gov (Russell Brand)
Newsgroups: comp.sys.sun
Subject: Using Maxtor 4380E on 3/50 with 3.5
Message-ID: <8901130554.AA16420@wuthel.UUCP>
Date: 18 Jan 89 04:45:47 GMT
Sender: usenet@rice.edu
Organization: The Stepstone Corporation, Sandy Hook, CT
Lines: 9
Approved: Sun-Spots@rice.edu
Original-Date: Thu, 12 Jan 89 21:54:41 PST
X-Sun-Spots-Digest: Volume 7, Issue 108, message 14 of 16