tip and mark parity?

Article View: comp.sys.sun

Article #10604

#10604

From: Rudolf Baumann
Date: Tue, 31 Jan 1989 07:41

12 lines
1158 bytes

I have an older model of 'minicomputer' which only want to talk to the sun
machines with 'mark' parity. In kermit it is perfectly possible to set
mark parity and all is working properly. But not so with tip - even
setting the parity to 'one' has no influence to what is going out. Does
anybody have a tip what could be wrong with my 'tip'?

--ruedi

Rudolf E. Baumann                                    ruba@biophys.zir.ethz.ch
Institut fuer Molekularbiologie & Biophysik          ruba@biophys.uucp
ETH Hoenggerberg                                     MOLEKULA@CZHETH5A.bitnet
CH-8093 Zuerich/Switzerland                          Tel. 01 377 33 97

Technical Details

Message-ID: <337@biophys.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!bbn!mit-eddie!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!bbn!mit-eddie!uw-beaver!rice!sun-spots-request
From: mcvax!biophys!ruba@uunet.uu.net (Rudolf Baumann)
Newsgroups: comp.sys.sun
Subject: tip and mark parity?
Message-ID: <337@biophys.UUCP>
Date: 31 Jan 89 07:41:18 GMT
Sender: usenet@rice.edu
Organization: Biophysics Institute ETHZ Switzerland
Lines: 12
Approved: Sun-Spots@rice.edu
Original-Date: 20 Jan 89 10:14:01 GMT
X-Sun-Spots-Digest: Volume 7, Issue 127, message 7 of 16