Re: problem on 386i w/ laserwriter II

Article View: comp.sys.sun

Article #10690

#10690

From: Richard Smith
Date: Thu, 02 Feb 1989 08:17

23 lines
1288 bytes

Hi Jeff,

For one thing, you could try specifying the baud rate of the port in your
printcap entry. Also, check out the "fc", "fs", "xc", and "xs" fields in
/etc/printcap. I suspect you will have to muck about with some of these
even if you get Transcript from Adobe. Our printcap entry looks like this:

lw|ps|postscript|PostScript:\
        :lp=/dev/lw:\
        :br#9600:rw:fc#0000374:fs#0000003:xc#0:xs#0040040:mx#0:sf:sb:\
        :if=/usr/local/lib/lw/psif:\
        :of=/usr/local/lib/lw/psof:\
        :gf=/usr/local/lib/lw/psgf:\
        :tf=/usr/local/lib/lw/pstf:\
        :nf=/usr/local/lib/lw/psnf:\
        :vf=/usr/local/lib/lw/psvf:\
        :sd=/usr/spool/lw:\
        :af=/usr/adm/lw.acct:\
        :lf=/usr/spool/lw/lw-log:

Thanks,
Richard Smith
Smiddy@spam.istc.sri.com

Technical Details

Message-ID: <8901252315.AA22258@rascal0>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ukma!husc6!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ukma!husc6!rice!sun-spots-request
From: smiddy@spam.istc.sri.com (Richard Smith)
Newsgroups: comp.sys.sun
Subject: Re: problem on 386i w/ laserwriter II
Message-ID: <8901252315.AA22258@rascal0>
Date: 2 Feb 89 08:17:53 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 23
Approved: Sun-Spots@rice.edu
Original-Date: Wed, 25 Jan 89 15:15:20 PST
X-Sun-Spots-Digest: Volume 7, Issue 133, message 10 of 13