eprom burner for use with Suns?

Article View: comp.sys.sun

Article #10705

#10705

From: Steve Elias
Date: Fri, 03 Feb 1989 03:18

11 lines
1049 bytes

is there anyone out there who has their workstation linked with an EPROM
burner via RS232 or SCSI?  i'm looking for a (hopefully) inexpensive EPROM
burner for 27256 or 27512 EPROMS...  most of the inexpensive units on the
market seem to require an IBM PC and it's bus...  this would be fine if i
had a Sun 386i, but i'm looking for something to use with a 3/60.  a unit
which used rs232 link would be preferred; it would probably be the
cheapest solution...  any advice appreciated.

(thanks in advance to all who respond).

steve elias (eli@spdcc.com)

Technical Details

Message-ID: <8901251639.AA02241@ursa-major.SPDCC.COM>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: eli@ursa-major.spdcc.com (Steve Elias)
Newsgroups: comp.sys.sun
Subject: eprom burner for use with Suns?
Message-ID: <8901251639.AA02241@ursa-major.SPDCC.COM>
Date: 3 Feb 89 03:18:20 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 11
Approved: Sun-Spots@rice.edu
Original-Date: Wed, 25 Jan 89 11:39:08 EDT
X-Sun-Spots-Digest: Volume 7, Issue 135, message 7 of 15