YP question

Article View: comp.sys.sun

Article #10801

#10801

From: Kerien Fitzpatrick
Date: Wed, 08 Feb 1989 12:25

23 lines
1529 bytes

I am trying to modify the installation that I manage so that the master yp
server is on a 3/180 running sunOS 3.5 and have a slave yp server that is
running sunOS 4.0.1.  At this point the client that is supposed to boot
from the slave server manages to download the bootfile, but then hangs
responding with "le0 missed packet" and occasionally it says that the
bootparam server is not responding.

Does anyone have such a setup running?  Should I just switch things so
that the machine running 4.0.1 is the master yp server and set up the
machine running 3.5 as a slave server?  I would rather have the 3.5
machine be the master since it is a 3/180 with some CDC Saber-850s while
the 4.0.1 machine is a 3/60 with a CDC Wren V.

I plan to switch everything over to 4.0.1 after some software is upgraded,
but at this time I must run the two different software versions.

Kerien Fitzpatrick
Field Robotics Center
The Robotics Institute
Carnegie Mellon University
Pittsburgh, PA 15213
arpanet: fitz@rodan.frc.ri.cmu.edu
(412)268-6564

Technical Details

Message-ID: <2550@kalliope.rice.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: fitz@cive.ri.cmu.edu (Kerien Fitzpatrick)
Newsgroups: comp.sys.sun
Subject: YP question
Message-ID: <2550@kalliope.rice.edu>
Date: 8 Feb 89 12:25:40 GMT
Sender: usenet@rice.edu
Organization: Carnegie-Mellon University, CS/RI
Lines: 23
Approved: Sun-Spots@rice.edu
Original-Date: Sun, 29 Jan 89 18:59:11 EST
X-Sun-Spots-Digest: Volume 7, Issue 143, message 7 of 16