Article View: comp.sys.sun
Article #10913Parity on ttya?
From: jfjr
Date: Tue, 14 Feb 1989 11:47
Date: Tue, 14 Feb 1989 11:47
13 lines
1011 bytes
1011 bytes
I've set up a UPI data feed into sun3 serial port A (sun 3.2) all descriptions coming say even parity 7 bit one stop bit. By default the Sun reads even parity eight bit? How do I change that to 7 bit. Has anybody done this - any help would bre appreciated [[ A good place to start is the Programmer's manuals. For SunOS 4.0 and later, look at termio(4). For 3.x systems (and earlier?!), look at (...I don't have any 3.x manuals at my disposal so this is from memory...) ioctl(4) and tty(4). --wnl ]] Jerry Freedman, Jr jfjr@mbunix.mitre.org
Technical Details
Message-ID:
<8902022044.AA13375@mbunix.mitre.org>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request From: jfjr@mbunix.mitre.org Newsgroups: comp.sys.sun Subject: Parity on ttya? Message-ID: <8902022044.AA13375@mbunix.mitre.org> Date: 14 Feb 89 11:47:31 GMT Sender: usenet@rice.edu Organization: Sun-Spots Lines: 13 Approved: Sun-Spots@rice.edu Original-Date: Thu, 02 Feb 89 15:44:00 EST X-Sun-Spots-Digest: Volume 7, Issue 153, message 9 of 16