Re: Diskless client under 4.0

Article View: comp.sys.sun

Article #11011

#11011

From: erc3ba!wmg
Date: Sun, 19 Feb 1989 00:46

21 lines
1464 bytes

In article <8902031448.AA11583@rufus.math.nwu.edu> you write:
>We are adding a 3/60 to a network served by a 3/260 (with 8M of physical
>memory and 16M of swap space for the server) which currently has one other
>diskless client....The client boots, but at the end of the boot
>sequence, it complains of NFS write error 13 several times and then comes
>up multiuser.   However, sunview is painfully slow while it works fine on
>the first client.   Does anyone have any explanations or helpful advice?

On the NFS write error 13 it has to do with the /etc/exports file.  You do
not have an entry for the client that you just added.  After making an
entry as per the man page (section 5) you must rerun /etc/exportfs.  There
is more info on exportfs(8) in section 8 of the manual.  If you have any
problems, send mail or call.

Good luck,

Bill Gilroy

William M. Gilroy - AT&T Engineering Research Center
erc3ba!wmg
(609) 639-2582	- CORNET 258

Technical Details

Message-ID: <8902151527.AA16170@rutgers.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: erc3ba!wmg@att.att.com
Newsgroups: comp.sys.sun
Subject: Re: Diskless client under 4.0
Message-ID: <8902151527.AA16170@rutgers.edu>
Date: 19 Feb 89 00:46:58 GMT
Sender: usenet@rice.edu
Organization: AT&T ERC, Princeton, NJ
Lines: 21
Approved: Sun-Spots@rice.edu
Original-Date: Wed, 15 Feb 89 10:27:43 EST
X-Sun-Spots-Digest: Volume 7, Issue 160, message 4 of 13
X-Issue-Reference: v7n153