Mouse motion scaling factors?

Article View: comp.sys.sun

Article #11032

#11032

From: x-6478, 4.85
Date: Sun, 19 Feb 1989 07:10

15 lines
1246 bytes

I've noticed that whenever I increase (i.e. > 2) the mouse motion scaling
factor (1st_ceiling) on monochrome Suns it updates the default parameters
for that session only.

This problem persists only on monochrome Suns not on color Suns where it
reads in the correct value from .defaults on startup. Any clues ?  It's
very irritating to be stuck with a much slower mouse every time I get out
and back into SunView. I dont see any mention of it in the documentation
so any help would be appreciated even if this has been a RTFM problem.
Thanks.

sandeep
--
Sandeep Mehta                                      uunet!philabs!bebop!sxm
Philips Laboratories                               sxm@philabs.philips.com

Technical Details

Message-ID: <8902131549.AA08335@philabs.Philips.Com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!mit-eddie!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!mit-eddie!uw-beaver!rice!sun-spots-request
From: sxm@philabs.philips.com (x-6478, 4.85)
Newsgroups: comp.sys.sun
Subject: Mouse motion scaling factors?
Message-ID: <8902131549.AA08335@philabs.Philips.Com>
Date: 19 Feb 89 07:10:34 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 13 Feb 89 10:51:01 -0500
X-Sun-Spots-Digest: Volume 7, Issue 161, message 10 of 16