tcopy(1) (was Re: 1/4 inch cartridge tape drives & tar)

Article View: comp.sys.sun

Article #11095

#11095

From: Paul V. O'Neill
Date: Wed, 22 Feb 1989 19:23

22 lines
1524 bytes

> Fine, but what if you *forget* how many files are on the tape (ok, lose
> the paper it's written down on :-)), or worse yet, replace a tar with a.....

Oh, come on!! A tape that is unlabeled is worthless.

This brings up a pet peeve of mine about 4.0.  tcopy(1) is brain-dead.  It
would be so nice if it worked as described in the man page.

     When only a source drive is specified, tcopy scans the tape,
     and displays information about the sizes of records and tape
     files.  If a destination is specified, tcopy makes a  copies  (sic) ....

I've tried all kinds of redirects but it always spews the entire contents
of argument 1 (source tape) to the screen.  (4/110, /dev/nrst8, SunOS 4.0)

Has anyone been able to get tcopy to just list the summary??  Then if you
"*forget* how many files...." you could just tcopy(1) it.

Paul O'Neill                 pvo@oce.orst.edu
Coastal Imaging Lab
OSU--Oceanography
Corvallis, OR  97331         503-754-3251

Technical Details

Message-ID: <8902140230.AA02499@sapphire.oce.orst.edu>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: pvo1478@oce.orst.edu (Paul V. O'Neill)
Newsgroups: comp.sys.sun
Subject: tcopy(1) (was Re: 1/4 inch cartridge tape drives & tar)
Message-ID: <8902140230.AA02499@sapphire.oce.orst.edu>
Date: 22 Feb 89 19:23:11 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 22
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 13 Feb 89 18:30:05 PST
X-Sun-Spots-Digest: Volume 7, Issue 166, message 4 of 15
X-Issue-Reference: v7n151