Article View: comp.sys.sun
Article #11172Re: Postscript Printing
From: Brett Chapman
Date: Tue, 28 Feb 1989 14:08
Date: Tue, 28 Feb 1989 14:08
13 lines
1046 bytes
1046 bytes
If you check the LaserWriter II NT/NTX Owner's Guide starting on page 119, there are instructions for cranking the printer up to 57.6K baud. I have our NT running at 38.4K baud (highest practical on sun) with no ill effects. Depending on what your printing, you can get a good 30% improvement in through- put. This is certainly a cheaper solution than purchasing new hardware. Brett Chapman Systems Administrator General Electric Medical Systems - Ultrasound Modality UUCP: uunet!steinmetz!gemed!chapmanB sun!sunbrew!gemed!chapmanB
Technical Details
Message-ID:
<8902091646.AA03632@sol>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request From: mcnc.org!steinmetz!gemed!sol!blc@cs.utexas.edu (Brett Chapman) Newsgroups: comp.sys.sun Subject: Re: Postscript Printing Message-ID: <8902091646.AA03632@sol> Date: 28 Feb 89 14:08:04 GMT Sender: usenet@rice.edu Organization: Sun-Spots Lines: 13 Approved: Sun-Spots@rice.edu Original-Date: Thu, 9 Feb 89 10:46:35 CST X-Sun-Spots-Digest: Volume 7, Issue 172, message 10 of 15