Article View: comp.sys.sun
Article #11217Re: ie0: lost interrupt: resetting
From: Christopher M. Meier
Date: Wed, 01 Mar 1989 18:42
Date: Wed, 01 Mar 1989 18:42
18 lines
1542 bytes
1542 bytes
rudolf@oce.orst.edu (Jim Rudolf) writes: >...[getting "ie0: lost interrupt: resetting" messages] >If this starts happening, we'll generally start getting a few of these too: > NFS getattr failed for server neptune: RPC: Timed out Until I read this line, I thought this was written by someone here. We have no 'neptune' 280. We have seen this, but mostly at times when someone is adding/removing a number of nodes from the ethernet. This seems to cause lots of 'noise' on the cable(s). I can't qualify the 'noise', as I haven't had a sniffer to use during one of those times. It has also been seen when the network traffic is heavy, but someone somewhere may have been fooling with the cable. We don't have a solution. @ Christopher M. Meier ms: MN65-2300 Honeywell Systems & Research Center @ Research Scientist/SIP (612) 782-7191 3660 Technology Drive @ meier@SRC.Honeywell.COM !SRCSIP!meier Mpls, MN 55418
Technical Details
Message-ID:
<17217@srcsip.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!csd4.milw.wisc.edu!mailrus!cornell!uw-beaver!rice!sun-spots-requestReferences:
<8902080633.AA07926@oce.orst.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!lll-winken!csd4.milw.wisc.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request From: mtap!meier@rutgers.edu (Christopher M. Meier) Newsgroups: comp.sys.sun Subject: Re: ie0: lost interrupt: resetting Message-ID: <17217@srcsip.UUCP> Date: 1 Mar 89 18:42:49 GMT References: <8902080633.AA07926@oce.orst.edu> Sender: usenet@rice.edu Organization: Honeywell Systems & Research Center, Camden, MN Lines: 18 Approved: Sun-Spots@rice.edu Original-Date: 19 Feb 89 04:33:11 GMT X-Sun-Spots-Digest: Volume 7, Issue 176, message 3 of 12 X-Issue-Reference: v7n157