Article View: comp.sys.sun
Article #11242Integral Data Systems Prism 132 printcap needed
From: Dan Davison
Date: Thu, 02 Mar 1989 05:09
Date: Thu, 02 Mar 1989 05:09
21 lines
1198 bytes
1198 bytes
Dear Spots, We recently came across two Integral Data Systems Prism 132 dot matrix printers and would like to use them on a network of Sun-3 and Sun-4s for (very) low-quality output. Unfortunately, the *manual* for the printers has not been found. Does anyone out there have a working printcap for this printer? When we use a generic dot-matrix printcap we get lots of funny characters, which suggests that some sort of parity/baud rate/stop bits setup is incorrect. Without the manual, we're flying blind. Any help would be greatly appreciated! dan davison theoretical biology and biophysics t-10 ms k710 los alamos national laboratory los alamos, nm 87545 USA dd@lanl.gov 505-665-1355
Technical Details
Message-ID:
<8902202346.AA01014@benden>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request From: dbd%benden@lanl.gov (Dan Davison) Newsgroups: comp.sys.sun Subject: Integral Data Systems Prism 132 printcap needed Message-ID: <8902202346.AA01014@benden> Date: 2 Mar 89 05:09:15 GMT Sender: usenet@rice.edu Organization: Sun-Spots Lines: 21 Approved: Sun-Spots@rice.edu Original-Date: Mon, 20 Feb 89 16:46:15 MST X-Sun-Spots-Digest: Volume 7, Issue 177, message 16 of 20