3/60 lockup under X11r2

Article View: comp.sys.sun

Article #11561

#11561

From: John C Schultz
Date: Wed, 15 Mar 1989 17:25

15 lines
1227 bytes

We having been having intermittent problems with our diskless Sun 3/60s
locking up after coming out of xlock under X11R2.  The symptoms are that
the 3/60 will unlock fine and you will be working.  Suddenly the display
will go black and nothing, including L1-a will get a response.  You have
to turn the power off and back on.  

I am not sure that this behaviour is related to xlock or even X11R2 since
I seem to recall it happening under Sunview.  It happens on a 3/60M and a
3/60C.  

Anyone seen similiar problems and have suggestions?

--
 john c. schultz   schultz@3M.Com   ..!uiucuxc!mmm!schultz  (612) 733-4047
           3M Center, Bldg 518-1-1, St. Paul, MN 55144-1000

Technical Details

Message-ID: <SCHULTZ.89Mar3181934@mmm.3m.uucp.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: schultz@mmm.3m.uucp.com (John C Schultz)
Newsgroups: comp.sys.sun
Subject: 3/60 lockup under X11r2
Keywords: Hardware
Message-ID: <SCHULTZ.89Mar3181934@mmm.3m.uucp.com>
Date: 15 Mar 89 17:25:33 GMT
Sender: usenet@rice.edu
Organization: 3M Engineering Systems & Technology Lab, St. Paul MN
Lines: 15
Approved: Sun-Spots@rice.edu
Original-Date: 4 Mar 89 00:19:35 GMT
X-Sun-Spots-Digest: Volume 7, Issue 200, message 6 of 16