🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun
Article #11563

Hardware DES support on 3/60's

#11563
From: Steve M. Burinsky
Date: Wed, 15 Mar 1989 18:05
8 lines
851 bytes
I dropped an AMD DES chip into my 3/60, modified the kernal, and rebooted;
but the device wasn't found at autoconfig time.  On the 3/160 boards,
there is a PAL required in addition to the DES chip to make it all work.
However, on the 3/60 board, it appears as if all the PALs are present.
Has anybody run into this before?

Steve
smb@mimsy.umd.edu
Technical Details
Message-ID: <8903062251.AA05716@mimsy.umd.edu>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: smb@mimsy.umd.edu (Steve M. Burinsky)
Newsgroups: comp.sys.sun
Subject: Hardware DES support on 3/60's
Keywords: Hardware
Message-ID: <8903062251.AA05716@mimsy.umd.edu>
Date: 15 Mar 89 18:05:54 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 8
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 6 Mar 89 17:51:59 EST
X-Sun-Spots-Digest: Volume 7, Issue 200, message 8 of 16