SCSI 1/2" Mag Tape? Also, Sun 386i Expansion Box question

Article View: comp.sys.sun

Article #11569

#11569

From: Barry Shein
Date: Wed, 15 Mar 1989 20:07

17 lines
1279 bytes

A friend has acquired a Kennedy 9612 1/2" tape drive (aka Pertec 9610)
with a SCSI controller board (Emulex QT13.) This is for a Vaxstation but
he is interested in running it on a Sun he has access to also, on
occasion.

Does anyone run a configuration like this on a Sun SCSI port? What did you
do for a driver?

Another friend (I have ignorant friends :-) has one of those 386i
expansion boxes with a 1/4" cartridge tape in it and asks if it can be
hooked up to, eg, a Sun3/60, preferably leaving it in the original box
(that is, does this just have a standard Sun SCSI port and should just
work with the st driver or is it stranger than that?)

Reply to me (bzs@encore.com) and I'll forward. Thanks, perhaps.

	-Barry Shein, ||Encore||

Technical Details

Message-ID: <8903062308.AA12781@multimax.encore.com>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: bzs@encore.com (Barry Shein)
Newsgroups: comp.sys.sun
Subject: SCSI 1/2" Mag Tape? Also, Sun 386i Expansion Box question
Keywords: Hardware
Message-ID: <8903062308.AA12781@multimax.encore.com>
Date: 15 Mar 89 20:07:05 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 17
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 6 Mar 89 18:08:12 -0500
X-Sun-Spots-Digest: Volume 7, Issue 200, message 14 of 16