Article View: comp.sys.sun
Article #11647Re: Dos Windows on 386i with X
From: mrevox!rwu
Date: Thu, 23 Mar 1989 09:02
Date: Thu, 23 Mar 1989 09:02
25 lines
1458 bytes
1458 bytes
/***** mrevox:comp.sys.sun / rice!sun-spots-request / 6:26 am Mar 1, 1989*/ I have just gotten X11R3 up and running on my Sun 386i, and now (as I expected) I can no longer fire up my DOS windows like I could with SunView. Is there some way of doing this?... /* ---------- */ What I do is to start up Sunview, then start up X11R3 under overview (see overview(1)). To get back to sunview from X11, type <left diamond><L2>. To get back to X11 from Sunview, click on the overview icon. The command to start up X11 from sunview is: overview -w xinit [-geometry XxY] [-fn font] [-- server [-a x] [-t x]] This lets you switch back and forth between X11 (which I use most of the time) and Sunview (which I use mainly to get at the DOS window). Ron Underwood UUCP: bellcore!rwu ARPA: rwu@bellcore.com (201) 829-3317 Bell Communications Research 435 South St. Room 2D-392 Morristown, NJ 07960-1961
Technical Details
Message-ID:
<25900001@mrevox.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-requestReferences:
<51636@rice.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request From: mrevox!rwu@bellcore.bellcore.com Newsgroups: comp.sys.sun Subject: Re: Dos Windows on 386i with X Keywords: Windows Message-ID: <25900001@mrevox.UUCP> Date: 23 Mar 89 09:02:32 GMT References: <51636@rice.UUCP> Sender: usenet@rice.edu Organization: Bell Communications Research, Inc. Lines: 25 Approved: Sun-Spots@rice.edu Original-Date: 8 Mar 89 16:15:00 GMT X-Sun-Spots-Digest: Volume 7, Issue 207, message 6 of 15